Search results

I used the Creality CR-Scan Ferret Pro.

Good to know! I'll try some powder next time I'm having an issue getting a good scan.

Ok, so I'll try and answer your questions in order, and based on my experience of testing it with a few previously printed parts and on the truck shifter hole I posted about. Full disclosure: I have only owned and used it for a few days. 1. How easy is it to use, and how good are the results...

I scanned the shifter hole and designed a platform for holding/charging my phone that would fit in there. It came out pretty good, I think.

Nice! I like how the phone is hidden away. The phone getting extra hot when wirelessly charging is usually an alignment issue with the charger. You might be able to adjust where you have the charger mounted. I've been working on a charger for my phone for the hole that the shifter folds...

Alright, so my scanner came in and I've had a go at scanning the shifter hole and creating a flat platform for building off of. Ive created a smaller and larger version and messed around with adding phone mounts and storage to the smaller one. https://www.thingiverse.com/thing:6876636 Here is...

Did you ever pick one up? Ive been wanting one fore a while as well! Just ordered the Creality Scan Ferret Pro.

The first drive seemed the same, even with the 8-degree mount vs. the flat mount I originally had. My biggest worry with this setup will be vibration. The comma hangs off the window much farther with this setup than with the straight window mount.

Hey all, I recently purchased and installed a Comma AI 3x and wanted to show how I mounted it. So I got @Ajzride's sliding mount printed last night and was looking at where to install it. I had a dashcam that used the screw holding my mirror to the window for its mount, so I decided to remove...

I ended up cutting and soldering in a 12 conductor extension. Didn't want to wait for the pins that are on backorder. On a side note, I had a longer drive today, about 50 miles, and I noticed about halfway through that I had not connected the OBD2 plug. Thing is the Comma booted up and...

Hey, I just want to say thanks for all the hard work on this everyone! I got my Comma3x installed and running the latest staging version of Bluepilot, and I extended my harness to the mirror. I went for my first few drives today, and so far, so good! I'm printing the 8-degree window mount now...

If you do not already have it, the ABRP (A Better Rout Planer) App is a must for navigating longer trips. I've made multiple trips from Birmingham to Baltimore for work and have rarely had an issue with the route planning and charging stop suggestions from that app. You can even filter out...

I printed them myself. I can share the file if you are interested. I'm also going to be carrying a few with me on my work travels so if anyone sees me at a charger, just come say hi and ill give you a pair for free.

I didn't have the B&O system, so I can't speak for the center speaker debacle. But I replaced all my door speakers and tweeters with some speakers I found on Amazon. These for the front. and these for the rear. Everything was plug-and-play, so installation was a breeze. A few days later, I also...

Got em on today. Couldn't get them right in the middle with the lengths of hose I got, so they are hanging off just to the side. Just like irl 🤣

Working on printing a couple of these "Truck Nuts" https://www.thingiverse.com/thing:6724947 I originally saw them on a Reddit post. I found an STL and edited it so it could be hung on a hose to look like it's wired up.

Went for a drive this morning. The road noise is probably quieter, but I can definitely say this. I won't ever hear the road noise now with the new speakers sounding so damn good! If you haven't got any sound-deading materials yet, I'd just swap the speakers out first and then decide. It's...

Interesting. Do you have a picture? How did you mount it?

I feel ya there. The main reason I went with what I did is less work.