Search results

This is the way. I still, to this day, for longer trips anyway, plan my route in ABRP, check suggested stops in with PlugShare, then navigate with Google to each stop. I just dont fully trust googles suggested stops yet.

Interesting. I hadn't considered whether the power on/off sequence would make a difference. I don't have any particular consistency on how I connect/disconnect my comma. I always remove it from the mount and store it in the glovebox when the truck is parked. But while troubleshooting...

Ordered. I'll update here when they come in on whether it fixed the issue or not. I didn't consider the harness box itself going out. Now I'm gonna pop that thing open when I get back home and start probing around.

Hey all, I've had my 3x installed and running with no issues on my '23 XLT for the past year with no issues, until the past few weeks. I started getting a "Canbus disconnected. Likely faulty cable error" message on the comma sporadically, and the truck would throw camera and parking sensor...

I second ABRP and Plugshare for longer trips. I use ABRP to plan my route and then navigate to each charging station with my preferred app. Also, it hasn't happened to me in a while, but I have pulled up to chargers that were all out of order, so cross-checking the stations on your route with...

Well I would do blue to match my truck. 🤪 I like the light blue accent color on these trucks and it really brings out the blue in the antimatter blue.

Got a new part number for the list. PZ1P-7P156-ED. It was plug and play, and came out of a '22 Bronco Sport. It has a blue ring around the base of the dial. It is not motorized and electrically shifts back to P when you open the door in D. "L" button activates N hold. It will not rotate...

It makes me smile every time I see a post about these ? They definitely did fill up with water and anything else that found its way in them until I drilled a large hole in the bottom.

For sure! I'll upload it when I get off work.

Awesome! Love seeing what people 3d print for their trucks. I also designed some caps for mine! They look like wire nuts ?

I used the Creality CR-Scan Ferret Pro.

Good to know! I'll try some powder next time I'm having an issue getting a good scan.

Ok, so I'll try and answer your questions in order, and based on my experience of testing it with a few previously printed parts and on the truck shifter hole I posted about. Full disclosure: I have only owned and used it for a few days. 1. How easy is it to use, and how good are the results...

I scanned the shifter hole and designed a platform for holding/charging my phone that would fit in there. It came out pretty good, I think.

Nice! I like how the phone is hidden away. The phone getting extra hot when wirelessly charging is usually an alignment issue with the charger. You might be able to adjust where you have the charger mounted. I've been working on a charger for my phone for the hole that the shifter folds...

Alright, so my scanner came in and I've had a go at scanning the shifter hole and creating a flat platform for building off of. Ive created a smaller and larger version and messed around with adding phone mounts and storage to the smaller one. https://www.thingiverse.com/thing:6876636 Here is...

Did you ever pick one up? Ive been wanting one fore a while as well! Just ordered the Creality Scan Ferret Pro.

The first drive seemed the same, even with the 8-degree mount vs. the flat mount I originally had. My biggest worry with this setup will be vibration. The comma hangs off the window much farther with this setup than with the straight window mount.

Hey all, I recently purchased and installed a Comma AI 3x and wanted to show how I mounted it. So I got @Ajzride's sliding mount printed last night and was looking at where to install it. I had a dashcam that used the screw holding my mirror to the window for its mount, so I decided to remove...

I ended up cutting and soldering in a 12 conductor extension. Didn't want to wait for the pins that are on backorder. On a side note, I had a longer drive today, about 50 miles, and I noticed about halfway through that I had not connected the OBD2 plug. Thing is the Comma booted up and...