Search results

I think the same procedure from the ICE trucks will work. You need both fobs and the slot under the cup holder. https://hiride.com/ford-f-150-find-factory-code-for-keyless-entry/

I just got 4.1.2.1 and no GUI change. Mine is 23 and I was on 4.1.1. since 1/12. The incompetence of the Ford software team knows no bounds. I cannot figure out what sort of architecture they could possibly have that won’t allow them to go straight to the latest version. I gave them a pass on...

When I tested it I didn’t have any tripping issue. It was daytime on a warm day so the load was pretty low, less than 1 kW. I assume the refrigerator was the main load. I’m rooting for a power failure so I can get some more experience with it.

You could pull 30 continuously so you need to derate the breaker so it needs to be at least 40. The #8 wire is THHN which is rated for a higher temp than romex so #8 is acceptable for 50A. You would need #6 romex.

I suspected it was Crossroads. Not confirmed but my salesman at Capital told me that Crossroads was not signed up to be an EV dealer under the new Ford dealership model. It seems odd for a dealership that big but it could explain their lack of interest in fixing your truck.

I see you are in NC. Curious which dealer has your truck for future reference.

It’s actually called out on the order guide under standard equipment at the Pro level. It should be on every Lightning. I didn’t fight the cargo net but this is a feature that should definitely be there.

Missing the key cylinder on the spare tire lock.

I have a couple of observations that I haven’t confirmed. One, the frunk button on the hood does not seem to work if the doors are locked. That makes sense if you try to open the frunk but it also seems to disable its ability to close the frunk. In my garage it will close with the button but at...

There’s a 200kW EVGo charger at a Wawa in Norfolk. There are a few other 50kW chargers in the area too.

I just got back from a trip where I charged 4 times at 3 EA stations and had no problems. Of the 18 dispensers at the 3 locations only one appeared to be offline and I got over 130 kW on each charge. On a previous trip I did end up at a location where 2 of 4 dispensers were down and I had to...

The J1772 spec calls for 10,000 mating cycles so once a day for 27 years. My guess is that Ford is making their suppliers provide evidence that the part on the truck is going to meet the spec. The cable on your charger may not meet that but the cable will probably wear out before the connector.

Yes, the conduit gets pretty crowded. Mine was a little tougher since I had to make a couple of turns to get into the wall. If you can make a straight connection it shouldn’t be a problem.

Yes, you can add tandem breakers to increase the number of circuits. It does mean you need to add two wires to the conduit for each additional circuit.

Installed last night. I received my ‘23 on 11/22 and this is my first update.

Nice! I wish I could have mounted mine in the wall. It would have saved a lot of work.

This past weekend I installed a Generac 6852 transfer switch to power my house from the pro power 240V plug. The 6852 is designed for a bonded neutral generator so it works perfectly with the Lightning. My main electrical panel is at the meter base. In the main panel there are the maximum 6...

I haven’t heard of any Lightnings being delivered without heated mirrors. Mine had the steering wheel and scales deleted but the heated mirrors work.

Thanks for all of your work. Ford should be paying you instead of making your life more difficult. You have provided more useful information than Ford and my dealer combined.

So far I’ve charged 3 times (2 locations) at EA using the Blue Oval network (plug and charge) and I still have the full 250 kWh in my account. If they want to keep giving me free charges I’ll keep using it but if it ever runs out I’ll just use the EA or other network apps.