Search results

Two different modules. BCM update for the actual function and an APIM update for the toggles. I don’t think these can be updated concurrently OTA.

The IPC settings reset if the IPC module fully reboots (instead of sleeps) for some reason. Could just be a glitch of it froze up. Had this happen a couple times. I thought it was a secret update but turns out it’s not.

Got it yesterday - still no BC1.4 Have had all the other recent ones like door module update and gateway module for 12v. Funny thing is I scheduled mobile service to have my tail light bar swapped under recall - it started leaking the other day. The service schedule gal mentioned the frunk...

Yes i thought they did. Could be wrong.

FitCam! I installed the 4K front cam with 1080 rear cam. it was pretty easy to route the wire for the rear cam under the headliner and along the driver side roof line. I installed the rear cam on the centermost edge of the window pane on the driver side. This allows the sliding window to...

The update files are fully download from the internet to the APIM or GWM before starting the update process - the update files are not live streamed from the internet to the modules. That would be way too risky for corruption. Same as on your iPhone and most tech devices - the files download...

As per usual @TaxmanHog is correct - I thought the little rectangle hole to the right of the bolt was a release like in ICE vehicles. @BSEE SPARKY Ignore what I said - There is no manual release.

Use the key that comes out of the fob - press the springy button on the bottom of the fob and pull the key out. That is the valet key to lock the glove box and armrest (you then give the fob bit to the valet and keep the metal key part. The metal key part also works on the drivers door lock in...

Typical dealer service writer - guessing with TOTAL certainty - Can't use the internet or read service bulletins

Updates are pushed to specific VINs which is controlled by Ford. It's not like an iPhone or pdate where they just post the files and the vehicles download at their discretion. Unfortunately you'll just have to wait until Ford pushes the update for your VIN. The check for a available updates...

Rocksgate Fossford is dope

Not Completed does not mean it’s still downloading. If it were still downloading it would show the status of Downloading with a progress bar. Not completed means either the downloaded file was corrupted or the ford system cancelled the update for your vehicle for some reason. There is no way...

Window speed is different because the front and rear windows have different regulators/motors. The front ones are smarter and have the two stage buttons for auto up or down. The rear ones have the less expensive simpler on/off manual motor/regulators. The Platinum trucks have the fancier motors...

Ok so guessing. Thanks for clarifying. Due respect, others with established credibility and deep knowledge in the updates have stated otherwise. Time will tell. Thanks for sharing your guess though.

Why not? Sounds like others have received it.

cool, it was just an FYI. lots of folks post about the updates thinking they are system wide upgrades.

Sorry typo on the update number. I have corrected. My post. Good catch. Thanks!

These are not total system software versions. They are update numbers. Each update is for a specific module in the truck. 10.1.1 updated the gateway module which controls interconnects to other modules on the truck. It has zero to do with charging or the hv battery. 10.3.0 updates the...

Nothing to fix. Typically this means the file downloaded and the checksum determined the module was already updated. Or in some instances the file download was corrupted. There is no way to force it. You have to wait for Ford to push the update again or of the update is not needed on your...

Dope! Thank you! @rugedraw Sounds like no need for dealer visit on the CSP then and just wait for BC1.4 OTA. Interesting how the update takes an hour plus with FDRS and requires a heavy duty power supply but OTA and it's done on the 12v battery alone and less time. I'm guessing the update is...