Sponsored

Search results

  1. 3D Printing Fun

    Water Bottle organizer. Water bottles tumble whenever there's less than 3 bottle's in place. so I thought of having something to prevent this and keeping the space.
  2. Redtiger F17 Elite Dashcam Review

    With FAT32, i would not be able to then utilize the full 512GB of storage space that i want to use.
  3. Redtiger F17 Elite Dashcam Review

    Forgot to mention how the F17 elite dashcam formats the micro-sd card. It sems like how its being formatted to be ready for Dashcam use is not compatible with a Macbook. The 128gb micro-sd and the 512gb micro-sd that i upgraded to couldn't be read by my Macbook. I have Parallels installed on it...
  4. Redtiger F17 Elite Dashcam Review

    In December 2025, I was selected as a Tester of the @Redtiger "Cyber Monday Surprise: Test the CES-Nominated F17 Elite Dashcam for Free!" (https://www.f150lightningforum.com/forum/threads/cyber-monday-surprise-test-the-ces-nominated-f17-elite-dashcam-for-free.33065/). The unit to be tested was a...
  5. Redtiger F17 Elite - Installation and Review

    #4 Fuse doesn’t give me constant 12.5 volts. It drops down after initial reading of 12.5. What could be wrong?
  6. 🎉 New Year Giveaway | Upgrade Your F-150 in 2026! 🎉

    planning on updating my Ford floor mats. the front passenger side keeps on moving.
  7. Cyber Monday Surprise: Test the CES-Nominated F17 Elite Dashcam for Free!

    Confirm that you agree to the testing requirements, including the timing and content of the review. - I confirm that I agree to all testing requirements, including the specified timing and content of the review. I will complete the review as instructed and follow all provided guidelines...
  8. Great Easy Lighting Mod (LED Pods Backup Lights)

    CAN you share a link to this light kit please. planning on putting these up as well.
  9. Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

    Thank you! Its beautiful! Happy it worked out well for you.
  10. Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

    You happy wiht Sunlu ASA? I tried Polylite ASA and its not working well for me.
  11. Where’s the savings!!!!

    Im coming from a Jeep andy insurance went up(?)
  12. Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

    My attempt with your design using PETG-GF
  13. Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

    i'll be printing this design next. are the parts meant to be printed separate or i can print them as one?
  14. Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

    Good to know. I'll be trying out PETG-GF next.
  15. Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

    No. Lucky enough to print and orient it flat.
  16. Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

    Nice. I'm trying that next. Here's my PLA-CF
  17. Loss of brake boost -Issue Date 2025-08-13 Campaign 25S77/25V488

    Im scheduled for next Friday and its mobile service.
  18. Loss of brake boost -Issue Date 2025-08-13 Campaign 25S77/25V488

    says to wait communication from Ford byb8/25. Already setup an appointment at my dealership.
  19. Loss of brake boost -Issue Date 2025-08-13 Campaign 25S77/25V488

    was looking confirmation that 2025 have been included in the steering TSB and this is what i found instead. https://www.nhtsa.gov/recalls?vymm=1FT6W3L7XSWG04772
  20. Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

    can you please share which Glass-Filled Nylon (PA6) product you used. thank you in advance.




Top