Search results

Its these - https://www.amazon.com/dp/B0BCJVYFMS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_33&th=1 tapped into the existing connection for the running board lights (which they may have removed in 2025 i think?) -...

Great video! Very creative install, I wouldve also loved to not have to tap in to the factory wiring, but I dont have the background to make my own harness, good job!

looking forward to seeing how you did it!

yes, placement is better than in-place running boards, they come out a little farther and lower than in-place running boards, which makes it easier to get in and out. grip is great, havent had an issue yes, the lights that come with it just use an extra y-harness attached tothe motor.

video of them

I’ll start the review off by saying I paid for these with my own moneys. So the story starts with us going from Baltimore to OBX and having to have a 4x4 because the house we rented was about 10 miles up the beach, with no paved roads. So I wanted to of course take the lightning, but my wife...

This is for a Gentex Auto-Dimming RearView Mirror with HomeLink V4 for the Ford F-150 2011-2025. It is plug and play, just unplug your old mirror and plug this guy in. It uses a custom harness I had ordered from Bob's Mirror. I ended up getting a frameless one from Bob's Mirror so dont need this...

how much did it cost you to get done?

This is for a Gentex Auto-Dimming RearView Mirror with HomeLink V4 for the Ford F-150 2011-2025. It is plug and play, just unplug your old mirror and plug this guy in. It uses a custom harness I had ordered from Bob's Mirror. I ended up getting a frameless one from Bob's Mirror so dont need this...

Fixed the pics, thanks

I have a couple of these rearview mirrors. People on ebay have returned them because they say they dont work with their garage doors, and I think it is because they are Homelink V4, which only works with older garage doors? They def light up and everything, so not sure why they wouldnt work...

just updated this today, as said by @glicenji , it was just updating those 4 lines. the only tricky part was on this line, the last digits started with a 01 now instead of 00 . I left those alone at 01 EG 311A 1 726-27-01 BCM/GEM Body Control Module / Generic Electronic Module (BCM/GEM)...

Starting a new thread for those of us who installed Passive Entry after the fact. @ZSC100 @Jesse-Infotainment Looks like this problem might eventually affect us all, so indeed let's start a new thread titled: DIY: Installing Passive Entry To A Lightning - 2025 Firmware Fix Whoever's is broken...

could you post a picture of the back of the hat? does it stretch at all?

I believe this is the seller I bought my blemished whole console from, you just have find a listing with a fold out console https://www.ebay.com/itm/166989000383?_skw=f150+console&epid=14054738589&itmmeta=01K5Q13ZV8MEXBRD31AEX0NJG0&hash=item26e151eebf:g:D9cAAeSwrsZowGgO but they were like...

i did it on my pro, bought a whole console on ebay for like $700 or something, it was blemished but the workspace lid was fine. Just put my old lid on the console and resold on ebay for the same amount after fees and everything. worked out well for me.

I also happen to have an extra one that I printed. I had a few people on the forum buy them from me and printed out 1 too many. PM me if interested.

@Ted23Lightning how long were your charging sessions? and going from what battery percent to what battery percent in those stops? We were thinking of going basically the same route, but just got a rental instead.

I installed the excalibur light bar like 2 weeks ago. So the wiring is different between the ICE F-150 taillights and the Lightning tailights. When I turned left, both lights in the lightbar would blink, and when I turned right, no lights would light up. So I contacted putco, and they were...

I installed the excalibur light bar like 2 weeks ago. So the wiring is different between the ICE F-150 taillights and the Lightning tailights. When I turned left, both lights in the lightbar would blink, and when I turned right, no lights would light up. So I contacted putco, and they were...