Recent content by Bob_Mac

Are you running any AntiVirus or AntiMalware on the laptop?

The only issues that some have had including myself was with FORScan changes to the APIM, IPC & IPMA. That's not to say everyone will have issues but any mods done on those modules should be reverted to avoid any configuration mismatches and/or update failures.

FORSkin? lmao. Some people were affected by FORScan changes in the IPC, IPMA and APIM and it is advised to revert back to allow for a smoother update and to avoid configuration mismatches. The choice is yours...

Run a self test on the IPMA and the PSCM

Here's the TSB that it's calling for.

Grab a pic of the DTC and post it here please (in FDRS with the DTC open)

@FordConvert It is NOT! Only revert the changes you made, do NOT do a full "Load All" and write all! Prior OTA updates may have made changes you're unaware of and this can make matters worse!

I'm tagging @Jesse-Infotainment & @iceman77 for their thoughts on this. So far you've reverted your FORScan changes and the DTC was resolved for the configuration issue but, a PMI hasn't worked and the update no longer shows in the SW tab correct?

@JaHoova , I'm curious as well and hopefully it's goes smooth. Keep us posted.

It's going in my guide. Right now it's only limited to the IPC and APIM modules. I've tagged @Livnitup in a previous post as there have been several reported issues I helped resolve based on the error that popped up during the updates.

I went back and looked through the 5 posts you made and saw this. Let me ask you a question, have you tried another 64GB USB stick maybe a USB 3.0 one?

K, forget my last response. What was wrong doing the APIM update? Failure, error popped up?

When you say available in FDRS, can you be more specific?

I have not been following your posts so, let me ask this, do you have any updates showing in FDRS?

Thx! I needed that laugh!