Recent content by CVDUDE

Correct. A few colors for the Lightning were discontinued after 2022.

I’ve been a happy member of the Atlas Blue Club for two years. Here’s to many more!

After almost 27,000 miles, the OEM Michelin Primacy XC tires on my XLT SR were pretty worn, especially on the outside. I replaced them with Falken Wildpeak H/T HT02 275/65R18. I paid $178 per tire plus installation and tax. The alignment cost was $79. The tires are heavier than OEM, but the...

It took 11 days and the issue was resolved.

Below are links to threads that might help you. They helped me when I had a module replaced. https://www.f150lightningforum.com/forum/threads/powertrain-malfunction-reduced-power.12873/ https://www.f150lightningforum.com/forum/threads/powertrain-malfunction-reduced-power-poll.14094/...

June 2022 22,788 miles

I got my truck back today! It was in the shop for 11 days. Module 6 was replaced.

My 2022 XLT SR with a blend date of 6/3/22 has been at the dealer for 5 days. I was told today that a battery module was ordered yesterday with an ETA of 7-14 days. The engine noise from the loaner Ford Escape reminds me of how quiet the Lightning is.

I really appreciate the information all of you have posted in this thread. 2022 XLT SR 22,788 miles March 6th: CSP 23B57 software update, CSP 23B70, and recall 22S71 completed by dealer March 7th: Successful charge March 9th: Charge fault, service vehicle soon, 53% power

Good to know. If needed, my plan is to run a few extension cords. It's nice to have the option.

Hurricane Hilary Information I'm going to charge my truck to 100% before Sunday night, just in case.

Today I got a load of wood chips from the local nursery. The ride is smooth, even with a full bed.

NPR article about Farley's trip "Even a short ride with Farley on his road trip spotlighted some of the practical challenges ahead as automakers prepare to get more Americans behind the wheel of an electric vehicle. At a charging stop in Las Vegas, half the chargers weren't working, and the...

I normally keep a cooler in the frunk, but I took it out this past weekend.

If you look at the second picture in my post, you can see that the holes for the pins are at an angle. I pulled and got the top pin to come out and then got the bottom pin to release.