Sponsored
garsh's latest activity
-
Cybertruck Suspension noises... This is Everytime you get in or out. -
garsh reacted to Balke's post in the thread What is the best app for planning a road trip? with
Like.
ABRP has been my go to -
garsh replied to the thread Oil Change on Lightning.Whoever did an "oil change" on a Tesla shouldn't have. I assume you're referring to the gearbox. Tesla's history with gearbox fluid is...
-
garsh reacted to Heliian's post in the thread Is my math correct? Is it really this cheap to operate? with Haha.
That's why I went with an EV. Our electrical rates in Ontario are stable and affordable. Our gasoline rates in Ontario are unstable...
-
garsh reacted to tls's post in the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation?? with Like.
There are two different versions of the Gen1 wall connector - part number ending in A or B, or part number ending in C or D. They both...
-
garsh reacted to ZSC100's post in the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation?? with Like.
True, kind of, The computer part of the OBC does use a fixed amount of power regardless of what's going on, but it's negligible. The...
-
Yes the Ford does have a premium interior. But things you depend on like Phone as a Key, has failed me twice where it took me inputting...
-
garsh replied to the thread Cybertruck for a couple of days... Again.Before that particular rumor starts spreading again, there never was a rust issue. Any time someone found rust on a Cybertruck, the...
-
garsh reacted to kps713's post in the thread Is my math correct? Is it really this cheap to operate? with Love.
I have had my 2025 Lightning FLASH for a little over a year now and have a little over 17,000 miles on it. I decided to do a...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Hello physics! Meet real-world engineering. :) Charging has overhead. The vehicle's on-board charger uses a fixed amount of power...
-
garsh reacted to teksavy's post in the thread Lovin' my '22.. and Nice Tesla Destination Charger- 80A! with Love.
Just a quick post that I ran across a Tesla destination charger that delivered a full 80A charge rate the other day at a local casino. I...
-
I kinda liked the old Leaf! I was driving a Fiesta hatchback before my lightning so I've got a soft spot for compact hatches of all...
-
Thanks for the writeup. There are a lot of days when I wonder about having a Cybertruck instead of the Lightning. I have been...
-
garsh replied to the thread Cybertruck for a couple of days... Again.That's what killed demand. I was quite willing to buy one at the originally-announced base price of $40k. Even adjusting for...
-
garsh reacted to ryun's post in the thread Lightning Cancellation is political? [LOCKED: NO POLITICS] with Like.
I think the straw that broke the camel's back was the fire at Ford's aluminum supplier. Pretty easy business decision to cancel a lower...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Batteries don't see "stress" from high AC charging rates. 64 amps at 240 volts is only 15kW. You need to get to 1C-2C rates before...
-
I thought I would give you all my thoughts on having a Cybertruck for a couple of days again. My Tesla Model 3 is getting the battery...
-
garsh reacted to tls's post in the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation?? with Like.
Summarizing long ago discussions about this, at 80A - 100% duty cycle - the Lightning won't accept the Gen1 unit's signal. At lower...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Yep, I always try to check the "supporting material" links Gemini provides. I'm always a little shocked when I find nothing that...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Should be an 80% duty cycle for 48 amps.
-
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Strange that the troubleshooting section of the manual doesn't mention this. Maybe you can put out a call for an owner of one of the...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.I believe that's from the Gen 2 Wall Connector manual. We've discovered that his EVSE is actually a first-generation High Power Wall...
-
garsh reacted to galstaf's post in the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation?? with Like.
it doesn't really "flash" as such.. more of a slow red on and off glow until you unplug it. I have checked all the electrical...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.You need to use a better AI. Here's what Gemini says:
-
garsh reacted to galstaf's post in the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation?? with Like.
Yessir! That's the one. My bad if it is not Gen2. I guess the eBay ad was incorrect! Good catch!
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.In that case, the number of times it flashes will point you towards the problem.
-
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.How many times does it flash? Basically. The part that's missing is that the Wall Connector defaults to the SWCAN protocol. You have...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Oh, maybe you have a Gen1 (called the High Power Wall Connector)...
-
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.It does, but it's strange that you don't have the switches mentioned in the manual. Can you share a picture, preferably with the cover off?
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Ah, so it's not a Gen 2 Wall Connector. Is it a Gen 3? See: https://www.tesla.com/support/charging/wall-connector/installing
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Galstaf, what adapter are you using to plug the wall connector into the truck? Is it actually rated for 80 amps? The J1772 protocol is...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.I'm not sure where this website obtained its information, but it appears to confirm the behavior of that switch...
-
garsh replied to the thread Can't get full 80Amps out of Tesla Gen 2... How to monitor the J1772 negotiation??.Reference: Tesla Gen 2 Wall Connector Installation Manual On page 21, it talks about setting the DIP switches. For DIP switch #2, it...
-
garsh reacted to bmwhitetx's post in the thread F150 Lightning FORScan thread - Version 2 with Like.
I’d like to understand the exact changes you made so I can put in post 1. Do you have the before and after Save files from Forscan you...
-
That was it. I changed mine from xxx3 to xxx7 and now the Welcome Lighting toggle is available. Thanks!
-
garsh reacted to bc1's post in the thread 🎉Winter F-150 Giveaway by TripleAliners! Winner Announcement with Like.
Congratulations to another TripleAliners Winner. I am still waiting on some better weather to get all my stuff installed but I like the...
-
garsh replied to the thread 🎉Winter F-150 Giveaway by TripleAliners! Winner Announcement.I guess I'll choose the bed mat. It was a tough decision between that an the tailgate mat. :) Thank you! Let me know the next steps. :)
-
garsh reacted to Deleted member 19221's post in the thread My Lightning burned to the ground with Sad.
Sadly my truck burned to the ground tonight. Felt a pop under my feet. There was a loud pop followed two smaller ones. We had barely...
-
I would say no. The truck has superior traction control and works well in snow. Now if you’re off-road and stuck all bets are off you...
