Recent content by Jaime

Waiting for someone to design a replacement, angled front hood that will improve aerodynamic efficiency...

I am on my 3rd light bar and just saw that it has condensation again. Live in So. Cal. When will @Ford Motor Company fix the issue once and for all? Since this was a safety recall, then Ford should guarantee replacements even for vehicles out of warranty.

Order ID: FAE:90012920 Ordered: 2024-02-29 Estimated: Sept 2024 (originally June) Shipped Date: 2024-9-12 Delivery Date: 2024-9-16

You should be able to temporarily disable the sensors. I would disable one pedal driving and Auto-Brake.

Had this happen right after an update. It went away after a couple power cycles (or some time passed).

A2Z EV sent me a Typhoon Pro to replace the Typhoon I had originally received with a misaligned pin. This new one does not have the contact misalignment. I was able to test out the Typhoon Pro this weekend and, while I saw throttling to about 100-110kW in direct sun in 100F heat, I was able to...

I've noticed this. I charge to 80% on 120V Level 1 EVSE. I turn on the truck and next thing I know it's already at 78%. Drive down the street less than a mile and it's at around 76%. I need to test it at other target SOC%. Will limit my max SOC to 75% and see if it happens then. Don't think...

Get an Ecoflow Delta Pro 3 that by itself has 4 kWh of battery storage. You can add an additional 2 batteries for a total of 12 kWh. Will probably cost you around $7K-8K. It can provide up to 4kW of power, so would work with a 16A EVSE. If you need more power (and battery capacity), you can...

What is written on the side of the terminal? That would help track down the part.

The "Energy Added" number keeps increasing at the rate it would normally charge at, even though 80% target was reached yesterday. I have not unplugged from 120V. Checked my energy monitor and there's only about 5W being used on the circuit the truck is plugged into. I also have another car on a...

6.8.0 gave me the SOC on the dash a couple days ago.

This is where I got my cable to modify a Gen 2 Tesla Wall Connector and they seem to have them in stock.

Amine, the CEO of @A2ZEV, called me on June 9th and said his engineers would look into this and he would call me back on Wednesday June 12th. I inquired about the internal construction and asked what would prevent misalignment during assembly and he provided a drawing of the contacts from one...

Ford NACS to CCS1 Adapter Part Number VRK9Z-10E805-A

Order 12920, confirmation email received 2/29 @ 8:53am Pacific. Got the "We appreciate you" email yesterday.