Recent content by JeezzzzKhalifaa

Jesse, every thread I read you always come up with some kinda good news or answers man, you’re really the GOAT! Let me know if you need some help testing out those files, I’m gonna have a different year truck than OP though, I have a 2024 XLT SR.

I’m also more than happy to test this update or help out with research into this if needed, just let me know.

Sorry for the confusion earlier, I didn’t realize the IPMA was above the drivers knee in the lightning. This mod is even more simple than I thought. It is almost beneficial to not have the connectors prewired so you have an excuse to directly wire the CCM to the IPMA lol. Either way, I wired...

Understood! I have a feeling I have the wires connected incorrectly too. I'll go out and take a look here shortly. The connectors I bought from Digikey as tagged in this thread are posted here again in case anyone reading this thread later needs it. Another quick question for you: Does the...

I suspect my truck just needs a little bit of time to detect the CCM module but to confirm, all I did was pin the connector shown in my post above (which is missing wires in the 9, 18, 19, 20 position) and directly connect my wires from the CCM that I ran in through the Firewall there, correct...

Hey everyone, I'm a long time reader of this forum and I finally got around to starting the mod on my '24 XLT SR. Earlier today I made my own "custom harness" from the OEM harness and installed the Radar unit. I passed in the CCM wires directly through the main firewall by the drivers side...