Recent content by oafydude28

Did removing the mirror throw any codes? I thought there were sensors in the mirror.

I can confirm the OBD adapter works on the 2025 Lightning. That is what I use in my 2025 Flash.

This looks nice. Where can you buy these?

Here is what the mount looks like in the lightning. There are a few tweaks that need to be made yet. If you are on the taller side you will see that it obscures mostly the view of the hood and a small area right in front of the truck. For example in the picture from my height 6’3” you will...

From my understanding it's and issue with the drivers. I found one post where someone was able to get it to work but I was not able to get it working myself. I only own Macs so I ended up picking up a really cheap laptop on market place just for FORScan.

It is printed in 2 different colors the black is only 1 layer thick.

I ended up going with ASA filament since it has better UV resistance. The Blue is alittle lighter but not enough to look off. Well at least to my eyes. I used the Bamboo slicer and printer for this. I doubled the thickness and then painted the bottom .2 mm the face of the logo. The model...

It definitely would not work for shorter drivers but would open up visibility for taller people. This is my view so moving it to the dash does not block any of the view out of the windshield.

I did find this dash grid for the lightning. I know I have seen a 3d print version. Would a universal comma 3 mount for this grid work better? https://www.bulletpointmountingsolutions.com/products/rubigrid-2022-ford-f-150-lightning-dash-mount-phone-device-holder

Yes I have the 15” screen.

I am really enjoying the Comma X3 but struggle with how much of the visibility it blocks with it sitting under the rearview mirror. I am 6’4” and from that vantage it blocks a lot. I found this mount for a Kia EV6 and am wondering if anyone has seen something similar for the lightning that...

Here is the link incase anyone else wants to print this. https://makerworld.com/models/1258513

I test printed the f150 on the tailgate in PLA to see if I like it. I was going for a look that matches the factory logos. I’m going to reprint it thicker and with PETG. Has anyone found a PETG the matches the blue?

What trailer plug are you using? Is there a delay for the video popping up if you are using CarPlay?

PJnc284 and UncleTony Thank you for all of your help and generosity. The breakout board worked for my 2025. There is NO codes and the one pedal works!!!!