Sponsored
sstevetx's latest activity
-
Not much left to say about Ford except Douchebag move. Just push the releases out and no one would even need FDRS. -
sstevetx reacted to Yellow Buddy's post in the thread My home electric bill has basically doubled in the past 4 months! WTF is going on? with
Haha.
Counterpoint: I installed solar about 10+ years ago that offset 80% of my usage. After buying an electric car, I installed a secondary... -
Android Auto is not a dongle. That is between your phone and the head unit. If myQ works in android auto it will work without any other...
-
sstevetx reacted to Poster_Nutbag's post in the thread Fobs lock/unlock but don't start ("no key detected") while PAAK and password work fine with Like.
Welp - I figured it out. Leaving post up in case it helps someone else diagnose this issue. After installing the rotary dial shifter I...
-
sstevetx reacted to jwrezz's post in the thread Fun AI Images of Your Lightning - Try This and Post Yours! with Haha.
I like how the cybertruck appears to be spinning its wheels (dirt rooster tail) as if trying to escape!
-
sstevetx replied to the thread Fun AI Images of Your Lightning - Try This and Post Yours!.This might impact efficiency...YMMV
-
-
sstevetx reacted to MountainAlive's post in the thread Fun AI Images of Your Lightning - Try This and Post Yours! with Love.
My mad max Lightning.
-
I should give a quick update. I continue to watch videos and think through what I might want/need from a printer. I found the...
-
sstevetx replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.I'm happy with Sunlu ASA now that I have the settings dialed in. I like that it comes neatly wound on a reusable plastic spool that...
-
sstevetx reacted to PolymerBuilt's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Hey all, working on a new option. Instead of the cupholder, going to a rectangular cubby but adding mounting holes for standard AMPS...
-
sstevetx replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.I need to try some of PA6-CF or GF at some point. My top surface never comes out perfect, so I made some inserts that I printed on a...
-
-
sstevetx reacted to BMac1203's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Just completed the conversion this evening! I printed this in Carbon Fiber Polycarbonate and I think it looks pretty darn close to...
-
That makes a billion times more sense. That would open up the market to many more people. Like those that stay around town most of the...
-
I know I'm a broken record here but I want a (Ford certified) external generator connection. Let me RENT a generator for the few times...
-
sstevetx reacted to PolymerBuilt's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Took some time to build out my own version of the mount. I wanted to fix a few things that bugged me. The angle on the driver side of...
-
sstevetx reacted to WXman's post in the thread Truck accelerated from stop and rear ended car in front. with Like.
I already hated 1 pedal driving. You just gave me another reason. Anyway, I hope insurance takes good care of you.
-
sstevetx reacted to MotoGary's post in the thread 2026 F-150 Lightning STX Model Introduced. Replaces the XLT with Haha.
What's the old saying?....LipSTX on a pig?
-
sstevetx reacted to bmwhitetx's post in the thread Footprint of 131Kwh battery vs 98 kw battery with Like.
Man, everybody is "remembering" wrong. :facepalm: There are three different size battery packs. The original 98kWh SR, original 131kWh...
-
sstevetx reacted to GDN's post in the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9 with Like.
Congrats. Been a busy day so just now getting to post. I figured it would be your day. Interestingly I got the updated today too...
-
sstevetx reacted to tommolog's post in the thread How Much Battery Capacity And Range Has My Ford F-150 Lightning Lost After 3 Years and 38,000 Miles? with Like.
That's what the video chapters are for. Just click "conclusion", and the video is only 2 minutes long :)
-
sstevetx reacted to RickLightning's post in the thread How Much Battery Capacity And Range Has My Ford F-150 Lightning Lost After 3 Years and 38,000 Miles? with Haha.
28 minute video to learn what the SOH is?
-
Ford part numbers usually are newer revisions if it's only the last two digits that are different. IE - higher # or letter
-
sstevetx replied to the thread Rotary Shifter Part Numbers.I ran across a few used ones on eBay that might work if anyone is interested in taking a chance. Both are around $85 with free shipping...
-
sstevetx replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.The original shifter models required removing the mounting tabs from the rotary shifter to make them fit. However, the newer models are...
-
-
sstevetx replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.FWIW, I printed mine in PETG and my truck is parked outside. I've had it installed since early April and I haven't had any issues in...
-
sstevetx reacted to Ricks Lightning's post in the thread How to lock frunk so it won’t open with Like.
They sell a tamper tape that can be applied to the gap between the panels..if the tape is cut, it's been opened. If it's intact, no need...
-
sstevetx reacted to rio's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Love.
Got mine printed yesterday. Used @masonta 's model (thanks!) with the Nalgene holder. I have an Elegoo Centauri Carbon and used PETG-GF...
-
sstevetx reacted to chl's post in the thread In the event of a battery fire, what is the fastest, easiest way to drag the truck out of the garage? with Like.
No, not really a myth - the stats consider that, not to would be kinda dumb, eh? One analysis of U.S. government data estimates that...
-
BACKTOSCHOOL5 Redeem in app (top left hamburger icon>promo codes). Not affiliated in any way, somebody shared with me and figured I'd...
-
sstevetx replied to the thread Stolen Tail Lights.I'm going to replace one screw on each tail light with a one way screw. I'll use a regular security screw in the other. There are...
-
Strange that Lightning updates quite often come out on a Sunday...but there it is....today a CMR update appeared in my list. I'm...
-
sstevetx reacted to Scorpio3d's post in the thread Walmart adding DCFC at a pretty good clip? with Like.
This is the second store near me that is adding DCFC one was completed a few months back. They started with the convenience store and...
-
sstevetx reacted to Telemachus's post in the thread Animated Raptor "FORD" Letter Grille Lights with Love.
I used an ESP32 to add a little animation sequence to my raptor lights.
-
I think the carbon fiber would be great. I am limited at the moment due to not having a ton of plates available for the H2D. I may look...
-
sstevetx replied to the thread Comma AI self driver assistant.Smooth look better, but I suspect the one made with the textured plate will hide future scratches better. Have you tried a carbon fiber...
-
sstevetx replied to the thread Rotary Shifter Part Numbers.Here's my info. Posted this previously in this thread, but I think the forum issues wiped it out. I bought and installed this back in...
-
sstevetx replied to the thread Happy Anniversary 12v battery failure.I picked one up (Motorcraft BAGM-H3) from RockAuto for $125 shipped including taxes and core. Came last week and I installed it over...
-
Well, my reasoning for doing it is - if Ford is willing to replace some critical components that have 2 1/2 years of wear on them for...
-
sstevetx reacted to MichaelPNW's post in the thread Home-built Android app for Lightning Math for any fellow geeks out there with Like.
I've been a long-time lurker, and this is my first post. If you're like me, then on a long road trip you're constantly doing math in...
-
sstevetx replied to the thread Low / Medium Cost Audio upgrade.That mount adapter might make the speaker too tall causing issues with the dash grill sitting flat. There is a raised circle on the...
-
sstevetx reacted to Rocky514's post in the thread F150 Lightning FORScan thread - Version 2 with Like.
I feel like it is a lot better, imo. If only I could get wireless AA to kick in quicker, lol.
-
sstevetx reacted to MidAtlanticLightningClub's post in the thread Ford releasing Bronco EV on China with Haha.
Like an F-150?
-
This one is tried and true by several members here and on the Mach E forum. @RiqRod just updated his last week with one of these and one...
-
I used this one on a 6 hour update about a week ago and it worked flawlessly.
-
sstevetx replied to the thread Lightning Software Updates using FDRS.The pl6100 was on sale about a week ago for $350, so it does go on sale from time to time if you aren't in a rush. Clore PL6100 - great...
-
sstevetx reacted to Warp Asylum's post in the thread Lightning Software Updates using FDRS with Like.
Clore PL6100 or equivalent, folks.
-
The sinking feeling of "oh, f-k, please don't brick it, please don't brick it, please don't..." is NOT worth the $100-200 you might save...
-
My power supply was not sufficient for the IPMA update, heed the advice here and do not skimp on the power supply. This is the tom...
-
sstevetx reacted to LUXMAN's post in the thread 🙋♂️ What Did You Do To Your Lightning Today? with Like.
Added some WeatherTech sill protectors to both my wife's @TexasGardeningGirl 22 blue XLT and my 22 white pro Her truck sees a lot of...
-
sstevetx reacted to mr.Magoo's post in the thread Shifter to rotary shifter - part number? with Haha.
If only this forum had a search function...
