Recent content by USA414

I'm in the same boat for my wife's Mach-E and my truck, sigh...

While I'm not an expert, and will defer to those here with more experience, I'm happy to share my thoughts/notes as I understand the process. I do not believe there is a "scripted" way to kick off an "update all modules" process in FDRS. I know there is a "download all option" in the Toolbox...

I also noticed something in FDRS when looking through the vehicle history. If you hover over the "Resource ID" column over the GXXXXXXX string, it will show you a version number. It only seems to do this for more recent updates, but I thought this was interesting in being able to identify the...

Thankfully I was able to get these issues sorted, so I wanted to take a moment and thank @rugedraw @ChrisCon and @Gimme_my_MME for their support. In addition, there were some important lessons learned on my end which I thought I'd share here: Having a capable power supply is essential for...

I was very close, but didn’t want to deal with always needing to feed the unit from a NEMA 5-20R, 20 amp outlet.

That's exactly why I got the 75 amp model as opposed to the 100 amp

Pretty much, but this is the exact one I purchased with cables https://www.amazon.com/dp/B004W8MQQC

I was pretty nervous seeing the voltage that low, and then my heart dropped when FDRS crashed roughly 2.5 hours in. I immediately purchased a 75 amp power supply with an adjustable voltage setting. After some research, I determined that I wanted to keep the LVB at 13.8v (AGM float), so I hooked...

I've been trying to run the IPMA PMI following the attempted update on 9/27 because of the power steering and lane centering issues I mentioned in my last post, but also was trying to fix the black box issue on my 360 camera since the IPMA update. In my mind, and from what I've read here and in...

Thanks for digging deeper into this, initially I thought the update went through, but I've been having a number of issues with the truck since. Lane assist always turns itself on now, even though I usually keep it off. The PSCS module will randomly go gray in FDRS. I usually drive in Sport mode...

OK, thanks - I will try that. QQ - When I performed the "Reset the IPMA Learned Values" function, it stated that I had to run the service alignment drive cycle, while driving. I think that's why I have that one fault code for the IPMA. Do you know if this should be/has to be done prior to the...

I thought I did, but can't confirm 100%

No it's orange

Well, this is a really tough first post here, but it seems I may be in a situation where my IPMA might be bricked and am now in need of a service appointment. Short story on this one is, I was in the process of updating modules back on 9/27 via FDRS and the application crashed on the laptop I...