Search results

I asked about this in another post this week to someone with 50k miles on gravel. The response wan no problem with the cooler fins or paint. I have a ‘99 F350 ranch truck, 200k miles with a similar located coolant radiator. Ranch truck means it’s on roads that are 2 wheel tracks sometimes...

I took a picture of how the main battery frame bracket was conflicting with the power step motor. The dark (moist) spot is about the area which would have to be removed for the power step motor to be mounted on the driver side front part of step. Works fine on the back but an extension in two...

Here are some pictures. I put some white paint on the magnets to help visibility. 7000 miles on the truck, 6k with this setup. Been thru rain and car washes of multiple styles with no issues. See previous posts for specs. I added Amp Powerstep XL’s this weekend and the electric connections at...

Yes! I just installed a set of Amp Research Powerstep XL’s on my ‘22 Platinum Extended Range. Mine was not just a rub or touching it was impossible to install without cutting one of the main battery support brackets. Before I shipped them back or called Real Trucks (where I got the steps)...

I’m not sure what needs editing. If you can’t open the Frunk manually (like my truck and others have reported) to get to the jump points or 12v, what options remain. Other than slicing the front passenger fender well liner and hacking into the jump point cables.

V1.0 is operational. I will take some pictures this weekend. Bought super strong magnets and gorilla glue from Amazon. Glued magnets in 4 places on the cover after grinding down the “catches” on the top two latch guides. I left the bottoms alone to help secure the cover and use gravity as an...

Yep. Thus the glue comment. Or maybe 3M double sided tape. If you look at the original post pictures there are “tabs” on the fender I should be able to glue magnets onto. I’ll probably have to remove the clip barbs on the cover but leave the rest of the clip as a guide.

Definitely like the idea. Todays magnets are incredibly compact and strong. Might even be able to glue magnets inside the fender and have sufficient “attraction to keep the cover attached.

You have securialert activated? What trim and were you 7/11? I asked and Ford said they stopped allowing securialert in the app until some bugs are fixed. Platinum trim here with AT&T 5G plan.

Not yet. Got wrapped up on other projects but I need to get back to this one. So many possibilities!

Front cooler should not be a problem. I have multiple Ford trucks. Lots of gravel. I was concerned when I picked up my Lightning and started inspecting. ‘99 F350 is the oldest with that configuration and it’s fine. Bug migration is our worst culprit. In the middle of snout nosed butterfly...

Thanks. I contacted Michael and he’s got me lined up.

Star white metallic. I decided to match the Lightning blue in the tailgate Lightning and bed badging.

I’ve got a grabber blue Mach-E coming in a couple weeks and I am wanting to have vinyl inserts made for my Lightning. The Lightning badging on the bed is pretty close to grabber blue but I’d like to match grabber blue exactly on the charge door F150, frunk grill horizontal, and tailgate F150...

How about a refillable “beer” bladder like surf boats use. Our Super Air Natique can take on several hundred gallons of water in multiple places inside the hill in minutes. The power is there. Need to add refrigeration!

Here is the part number from one of the Ford guys on 7/11. “They are molded in color so each color has its own part number. The basic part number should be 16720. It will be NL3Z-16720-XX with the XX part changing based on the color.” I am asking if available and cost. Thanks.

There is a sticker on the back with I guess a part number and “barcode”. Can’t read all the number. I’ll pop it off again tomorrow and post. Ford has the Maverick 3D files online and available for aftermarket accessorizors (sp?) but I can’t find the Lightning. There’s Ford guys from my 7/11...

What is required? I don’t know the 3D space but is there a scanner associated with 3D printing? Could I take mine somewhere and have the cover scanned and send you a file? Back in January Ford provided a truck to a company or they bought it and scanned the truck for after market...

The space would add at least another 50 “liters” of storage.

To take the faux cover off is very easy. Two tabs on top, two on the bottom. The fender liner is some kind of cloth like material (help me out here) that could be easily cut and u could reach thru to pop out the cover if the battery was dead and frunk closed but I’m not cutting anything on a...