Recommend following Juan's channel for those interested, he released a preliminary video from the little data already collected. As with all other aviation incidents it's just speculation until the NTSB reports its findings. My condolences to all involved.
Seems to be related to 24.5.1 as I received that update on 5/8 and subsequently lost the proximity functionality and touch behavior of my handles. Those few EEPROM registers I noted have fixed it, no issues since.
Should be plug and play. Believe it's the NL3Z-13A613-A which is going for over $500 on ebay. The more I look at the price of these parts the more interested I become in the extended warranty, would suck to lose the trailer assist because these keep dying.
Finally had a chance to try to get his resolved. Dealer refused mobile service as they weren't sure they could perform the repair in the field. They picked up my truck this morning and of course can't replicate now that the weather has cooled down. The numerous videos and pictures I have...
Bumping an old thread here but just had this happen for the first time this morning at 21,000 miles. Center display was unaffected. After about 30s of full black the screen turned on and UI elements began popping in one by one, but the display itself was sluggish to respond to inputs on the...
Any updates on you guys that got these cameras replaced, how have they held up? Mine has started doing it consistently when hot, wanted to make sure that the replacement does actually fix it.
BuiltRight's rear bench release was 20% off, had on my wishlist for a while. Turns out there's more space behind the seat than I thought.
https://a.co/d/6ssgUEJ
Luckily I didn't need to flash the 312A BCM firmware again, just needed to update those 4 addresses and now passive works as it did before the EAP WAL update.
Just following back up in case anybody similarly lost passive functionality after Ford has been screwing with WAL in EAP. Indeed the first few related registers in the BCM reverted to the 311A as-builts, had to go back in and modify them again. The affected blocks were:
726-18-01
726-24-01...