Recent content by dcshoes23

I don't. Everything is on normal/default settings. I have a Samsung Z Fold 5 but the UI pretty much looks the same whether the phone is opened or closed.

Same as you, Android and 5.15.0. I believe that this is just a web view in the app pointing to a web page that the FCSP serves. My FCSP is the same software version and firmware version as this thread. Weird.

How do you get to the cost to show up? Mine doesn't have that.

I think there are issues with this new version. I haven't had a single issue with my FCSP over the last year and a half. Last week I noticed that it was only charging at 6kW instead of the usual 8.9kW so I rebooted it by flipping the breaker off for a bit and then back on. After that, it was...

Fixed! I had crimped the connectors incorrectly onto the wires for the connector to the door handle. As a result, one of the wires broke and was only touching when I moved it a certain way. Anyways, I re-crimped all the pins correctly for that connector and it worked! Thanks for all the help...

Reviewing photos I took, it looks like I put two wires in the wrong spots (off by one each) in the harness that connects to the BCM. I'll fix the wiring tomorrow and see if that resolves the issue. Thanks for the help.

I added them to the oscilloscope but they didn't change when I touched the sensors. I forget which ones I added exactly.

@jwharvey1820 What final touchups did you have to do? I finished installing mine, installed the firmware, and did the forscan changes. It does not work. I tried testing all the wires from the BCM all the way to the handle and they are all fine. Was there anything else you had to do special for...

I just wanted to let everyone know that I ordered the following for my 2024 F-150 Lightning XLT which has the 434MHz key fob and everything works (except the tailgate button since I don't have a powered tailgate): Option 5, 434.26MHz...

Good to hear it's easy to get the wire through with the coat hanger. That was the last unknown I had. I feel like the install should go pretty smoothly. Hopefully the handle comes soon. 🤞

Thanks for those details. I didn't realize that it slides out like that. What about the other end that goes in the door jamb. Any trouble or tips for that end?

Thanks for posting this! I'm about to do it myself on my 24 XLT but the wrong door handle was shipped to me and I'm still waiting for the replacement. I have planned to do it the way you suggested where I'm running my own wires in the door between the handle and the inside of the door. I got...

Thanks for the help again. I will definitely make a post once everything is verified working. :)

Thanks so much @ZSC100 , that was a huge help. So, it looks like everything is the same. The last piece of the puzzle is the firmware. I would probably need the firmware from a 2024 Flash. You wouldn't happen to know where I could get that as well?

So I popped off the connector on the driver's door and it looks like I don't have the wires on my 2024 XLT EG-311A :sadface: I'm hoping that either the wires are just different for 2024 or that it isn't hard to add them. @ZSC100 where did you get the wiring diagram from? I'm trying to...