Sponsored
ENDianDigital's latest activity
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Wow, that's a fantastic looking print, nice job! Amazing design work too, @mr.Magoo! I just realized that's a two-piece console... -
ENDianDigital reacted to CRAIGC540's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with
Like.
This has to be the best mod you can do on the Lightning! Thanks to Thanks to @Drayday55 for printing it for me his version which is... -
ENDianDigital reacted to asianman35's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Just finished printing @mr.Magoo front shifter box for someone on the forum, and it came out really nice. Like I would have no issues...
-
ENDianDigital reacted to Drayday55's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Get the older shifters from 2020 to 2022 escape, etc. That have the mechanical servo inside.
-
ENDianDigital reacted to mr.Magoo's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
I didn't, well, until now that is. My first print turned into a birdsnest halfway through, so I had to start over. I modified the tub...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Hey, yeah sorry, I totally missed that front right bolt hole in your original pics. Yeah, that would totally be sufficient from what...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Amazing work, great job! So is it just using the back two bolts and the pressure of the trim piece to secure it in lieu of the front...
-
ENDianDigital reacted to mr.Magoo's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
I should have clarified as well, that the last three pictures are how it came.out of the printer, so it's unpainted, only the top one...
-
ENDianDigital reacted to mr.Magoo's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Here's my shifter setup... I didn't necessarily like the existing designs as they were a bit "chunky" and made an attempt to get it...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.These models are all out there as a result of a non-commercial design. Please consider supporting the creators (yes, that includes me...
-
ENDianDigital reacted to BennyTheBeaver's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
I got everything printed, however I'm unhappy with the way the rear printed, so I'm reprinting that. My initial observations were there...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Curious to hear how it turned out for you. Success?
-
ENDianDigital reacted to boggle's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Will fork when I have a minute, wanted to reprint mine and resolve some of the print issues and include those lessons learned before...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Love the clean OEM look! Great alternative for those that want to just use the OEM tub with a completely drop-in shifter option (with...
-
ENDianDigital reacted to boggle's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Love.
Finally got around to trying the insert in the OEM tub, pardon the draft finish. Plan to print again myself as I had some layer...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.I got a chance to create a cut version using the tool @boggle sent me. New version uploaded to Thingiverse :)
-
-
ENDianDigital reacted to BennyTheBeaver's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
My printer has been acting up but I'm going to try print this with Carbon Fiber infused PETG. If I can get through the prints unscathed...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.If you want to hold off a bit, I'm going to try seperating the body with the convoluted tool boggle sent me. Feel free to give it a go...
-
ENDianDigital reacted to 21st Century Truck's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Thanks. And BTW, I love the new avatar :crackup:
-
ENDianDigital reacted to 21st Century Truck's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Question: what size Gridfinity magnets are appropriate for the magnet holes in the shifter holder & lid? I just received my very 1st...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Sorry to hear that. Yeah, I used non-standard magnet sizes from what I think is typical for gridfinity and that mainly had to do with a...
-
ENDianDigital reacted to boggle's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
This should work, made it 0.003" thick so there's already some tolerance built into the subtractive cut. Might have to scale and rotate...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Learning CAD is my main all-weather hobby at the moment, so this is my "wild and crazy" cold Ohio Friday night fun, haha. Screaming...
-
ENDianDigital reacted to digitaldad's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Lot of work on a Friday/Friday Night, thanks for your dedication! P.S. Lovin' your new profile pic :clap:, at least, I think it was new.
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.OK, that was.... way more ass pain than I anticipated, haha. Anyway, here's what I made: I was all set on the dovetail idea, so I...
-
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.I sliced the model like you suggested and I think it will work. I might do an additional dovetail at the bottom of the box. If anyone...
-
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.This is why I'm grateful that you joined in on the project, haha. I really like the dovetail idea and that would all together...
-
ENDianDigital replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Interesting idea. Probably the easiest way to do this would be by cutting the model in half flush with the front (firewall-facing) face...
-
ENDianDigital reacted to 21st Century Truck's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Yesterday I installed a Ford Mustang Mach E rotary shifter in my Lightning. Thanks to Asianman35 for the 3D printed cubby with the...
-
ENDianDigital reacted to mr.Magoo's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
That's a bummer ! Thank you for sharing and taking one for the team.
-
ENDianDigital reacted to boggle's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Attached. Still working on the OEM tub model as well (ML3Z-1513530-AA), it's 99.9% there, trying to tune as I work on the press fit of...
-
ENDianDigital reacted to Drayday55's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Sending this set up to @Ajzride for all the work he's put into the Lightning Comma modification. Thank you !
-
ENDianDigital reacted to digitaldad's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Been working on and waiting to get these portions done: rotary shifter and the cupholder/glove/media lights (appreciate your harnesses...
