Search results

After making the the changes I listed in the post it will pop up when you press the seat heat or cooling buttons on the HVAC control.

To the first part of your question: to my knowledge no one has cracked the speed inhibit on the lights yet. I have poked around, but came up empty so far. For the DRLs: If someone has more knowledge on this please chime in. Something you could try (not sure if it will have the desired...

All I know is it is part of the police packages. It causes the headlights to flash back and forth (wig wag). No idea what triggers that mode though, I would assume there would be additional wiring / input linked to switch.

I haven’t tested yet, but I think the most likely cause of this issue is “Enhanced Windshield Anti Fogging Strategy”. Ford has a SSM specifically addressing it, effectively saying your HVAC is not broken when it does what it wants vs. what you want, it’s this ”feature” and it’s normal. If you...

Only one but it should be just the drivers side. The wiring diagram shows only the LH as well. That is curious if you have a dimming passenger mirror.

Those sensors are defiantly active all of the time. You can catch them with your phone camera. To be fair I have not personally tested the connection between the sensors and the crappy operation of the auto dimming mirror. It was claimed that taping over the IR sensor resulted in the mirrors...

Unless I’m crazy your image shows “EA”. If you change that A to a 5 it should work. 720-07-01 xxxx xx5x xx. Or was that A a test after trying 5?

I disabled mine for that exact reason. The dimming mirrors are self contained and not controlled by the module, so there is nothing in forscan to adjust. The rear view mirror has a front and rear light sensor. The rear view controls the side mirror. Another member reported that the IR...

I definitely think the fix for that is in the HVAC module. I just need to take the time to do some experimentation.

It is called Secure Idle and is in the BCM I believe. The 2021+ has it active by default unlike previous years from what I understand. It was active on my truck without modification.

You are the man! Based on this info I was able to enable Auto heated and cooled seats. Seats automatically heat or cool based on internal truck temp and selected temp. You will also see a APIM display of your temp selection and whether you are in Auto mode or not. Manual control is retained...

Nope, just kills the dimming. No warnings, DTCs, or other side effects. That is the only purpose for that connector, power in and control out for the side mirror

I do not believe there is anything that can be done via forscan. All of the sensing and control functions are done by the rearview mirror itself which then controls the side mirror. I disabled mine by disconnecting the connector on the rearview. You can leave the connector in the mirror, but...

I would be willing to bet you got a OTA that wiped your changes. I have yet to get a OTA myself, but I have updated a few modules manually using Ford FDRS. It seems to be hit and miss wether the changes are retained or not. I would assume OTAs would be the same.

By taking a look at the wiring diagram, I think I can safely say its not logic or software related in the BCM. The fog light DRL and Headlight DRL are tied to the same output from the BCM. If the BCM software or output was the cause both DRLs (fog and headlight) on that side should be flicking...

With the limited data we have it seems to be specific to the projector headlight setup. It may or may not be related to the mod, no enough info at this point (at least for me). If it is mod induced I’m sure it’s probably logic in the BCM related and it can probably be overcome. There are...

My Tremor 402A has all the the same options and functions as yours including blue cruise. Actually the high Termor and high Lariat are pretty much the same from a module perspective. Interestingly I have enabled glare free high beams via forscan so we are the same there as well. However that...

The system works basically the same way noise canceling works, but rather than suppressing noise they are accentuating certain notes. Since each of the engines have a different “natural“ sound, there are differences in what needs to be suppressed and accentuated to create the V8 sound. Using...

@dmac what are you trying to accomplish? Use the engine audio enhancement for the regular 3.5l ecoboost? If so, the engine calibrations are in: 727-04-01 xxxx **xx xx 01 is the 3.5l ecoboost 00 is the V8 (no enhancement) 07 is the 2.7l ecoboost All the other ones on the spread sheet are...

Yeah I am by no means saying it is directly related to the mod. The DRL function is full bright pre-mod I believe anyway, we are just keeping it that way with the parking lights / head lights. I just wanted @abd79 know he is not an isolated incident. The consistency of the flash leads me...