Search results

That might be a good option if someone wants to give it a try. Just need a good 3d designer to design the drop in piece and then you would need to cut a hole in the bottom for the hardness. I just kicked off another print job, but changing the infill to adaptive cubic and setting walls from 2...

My Bronco sport shifter with the rubberized knob came in and the good news is that it works. Bad news is I accidentally cracked the lip on my printed tub. I can probably glue it or something later or reprint. Here is all the info I have about the shifter, testing, print info and tips. Let me...

Glad you confirmed the door plates make such a difference. I installed all new speakers. the kicker subwoofer and door plates at the same time. I couldn't tell you at the time if the door plates made the difference with all the changes.

I use BambuStudio and I picked generic ASA for the Sunlu ASA. I modified the "Generic ASA" filament settings, but you may want to look for suggested settings for whatever brand you use. Flow Ratio 0.92 Nozzle temperature 260 initial / 260 other layers Textured PEI Plate 92 / 92 For supports...

Finally got the main part printed on my Bambu P1S with Sunlu ASA. First 2 attempts failed near the end with the model falling over. I got the temperatures dialed in better and added a lot more supports on the 3rd attempt. I'm currently printing out the flat lid.

I just ordered a used shifter on ebay for a 21 Bronco Sport (model LX6P-7P155-LE). I like the look of the dial on this shifter better than the chrome escape/bronco version. Connector and shape appears to be the same as Op's and the only difference in part numbers is the last 2 (le vs eh). I...

Mike, do you know if the Bronco Sport shifter is compatible? I like that design better too.

Not everyone sees savings. It depends on many factors such as how much you are paying for electricity where you charge. If you are in areas of the country where electricity is high or you aren't charging at home the majority of the time then it may cost more than an ICE vehicle. In addition...

Yes, it opens the tailgate.

I programmed an additional FOB for mine that has remote start rather than a frunk open button. The remote start works on mine with the FOB. I don't know if this works on all models and you lose the frunk open button, but it may be an option for you...

I use a 10-year old laptop with a 4th gen Intel i7-4600u (2.1GHz dual core, quad thread) and it runs fine on it. As far as power supply connection points, the ones under the passenger side frunk panel are the suggested ones. I often connect to the battery directly with the negative after the...

Interesting you mentioned the bug deflector. I actually have one coming on Sunday to see if it covers it as one option.

Something bounced up from the highway and hit my hood this weekend leaving 2 dents. The top edge of the lower dent reaches up to 5.5 inches from the lip of the hood and the other at about 7 inches up. Anyone have any experience getting dents out of their lightning in this part of the hood? I...

December

My Verizon s23u got the monthly security patch yesterday and my Paak still works. I had another update on the 5th.

My dealer called me recently about the csp with the charge cord to setup a mobile appt. They'll do it at my house the week of Christmas. They have done this with other csp's previously. It's too bad more dealers aren't like mine.

Probably want the blue loctite in case you ever want to remove it again

I enabled the lane change and other BC features in Forscan and it works currently. I saw where Mike had issue with the glare free after a FDRS update until he changed a value back. Do you think we should undo the BC Forscan settings before the update or just leave them?

You can just remove the ground and it will work. I pulled the ground wire from the connector rather than cut it in case I need to solder it back one day for some reason. Here are the pics from mine back in April and I haven't had any issues with errors like I previously did with it completely...

That is a good point about fed taxes, because I didn't consider that previously. I feel better about the $200/year now. Looks like 5 cents of the state part goes to public education. California pays 67 cents combined (yikes). Here's an interesting read on the Texas gas taxes -...