I have my truck setup to use my installed 10 circuit 240 volt transfer switches. All works perfectly. I just wish Ford would do an OTA update that would allow the pro power to run with the truck turned off. AKA camping mode.
Here is my “Unintelligent” backup power installation
I just went...
This is I what can see with Torque connected to ODBII port via bluetooth there are many pages lots of information. This is the Charging page shows battery charge in %, coolant Kw used, amps into battery, and Kw power into battery. Plus motor temps power output from motors in Foot Pounds. It...
Here is my “Unintelligent” backup power installation
I just went simple if power goes out I plug in the truck. Low cost setup.
Works no problem with the trucks GFI This setup cost me about $1,100.00. I just need to plug truck in and turn it on Pro power. ;) This transfer switch has 10 ciruits...
I wonder if one could unbolt the cabin from the trialer turn it 180 degrees and slide it into the back bed of the truck? But it's small enough it doesnt effect range anyways. ;) (y)
I plug in every time I park at home out side. The charging is time set for 07:00 pm to 07:00 am. This is for the cheaper cost of 7.4 cents per Kwh. In Ontario Canada they are offering during the times of 12:00 am to 07:00 am 2.4 cents per Kwh.
I made sure my truck is connected to my home WiFi and
Automatic Updates: On
Recurring Schedule: Sun at hours Mon at hours Tue at hours Wed at hours Thu at hours Fri at hours Sat at 02:00 am.
Also I set the truck to precondition for departure every morning at 06:00 am. That way it wakes up and...
We need more of this, just to see what's inside and what to tweek.
This is the best I can see with Torque connected to ODBII port via bluetooth there are many pages lots of information. This is the Charging page shows battery charge in %, coolant Kw used, amps into battery, and Kwpower into...