Search results

You've got a couple now, but adding one more: stuck on 21281 v244 XLT 302A with 360 cams no copilot assist (so no CCM vs Ebrou who does have this) VIN -> 1FTFW1E84MKE02174 Just found the "App Log" stuff in FDRS so have been taking a look as all those java stack traces are interesting (software...

also interested in this as I have a 302A (with 360) too

Nobody with an XLT without the copilot (adaptive cruise, adds the CCM?) above 21281 here then?

Thanks. Yeah that's the one I won't be able to do with a Nano anyways since it includes CCM. Will upgrade to a Mongoose if I can get unstuck to see that update I guess.

Still being stuck at 244 / 21281 with no IPMA update yet and the changes from the forscan spreadsheet still give my job1 the fullscreen cameras at speed. Neither those or the changes suggested above will give me cameras on the side cards. Assuming I only get those near the final updates ?‍♂️...

So my SecuriAlert decided to show up in the app today (guess it took some time after my FDRS updates?) but also get that error trying to create a schedule ??‍♂️

My TCU below:

I think the IPMA as well as it will kick off a CCM? I ran a network scan with the Nano a few times but was careful to check for corruption every time and close fdrs + rescan if found ??‍♂️ About the earlier cancelling talk I’m wondering about something… I did have to cancel once while the...

Sigh... *Update - and it's back. Was down 10-15mins

you could check 1FTFW1E84MKE02174 as I am in the exact same state as Ebrou? ?

Anyone do this on a XLT 302A with 8 inch cluster and know the part #?

After updating through FDRS I’m on 21281 now yet still no Securialert so may have something else going on with it ??‍♂️

Yes same for me on IPC. Why re-initiate it though mine seems updated ok. Just need to figure out how to start getting past 21281 now… *Edit ah just saw @Jesse-Infotainment latest and seems like a bunch of us all stuck here so if any XLT guys fully updated can help ?

Ok so with a 302A, 8 inch cluster, with 360 cams, no BC I'm at 21281 revision 244 and not seeing anymore updates. I only have an ACM "update" showing that seems to be for adding a woofer (it asks if adding one) that just fails: Not sure if it's normal to be stuck here at 244 now or not. But...

I know I am way behind everyone at this point. But from experience I know it's hard to follow along now in a 190 page thread :) Started at stuck 1.7.1, revision 144 today. 1 - GWM - usb. success, horn/lights showed up in fordpass 2 - APIM - usb. success - sync revision went from 144 to 244...

Got to my first IPC update. First step was 1918 steps.Then apparently a 99198 step update. Has been running for 5 hours and at 75000. And there’s still block 2 after? Didn’t realize IPC was ever this big :oops:. Guess it’s a late night for me :LOL:

Thanks. Yep tried just leaving it on when it tells me off but same problem comm error GWM update has dissapeared again so can't try again now. Something odd going on.

Yes downloads are back now thanks. GWM update is back now too. But I get an error, ignition on step it communicates fine, ignition off it gives a comm error happens with either a GWM update or a config. have tried a dozen times. I'm still connected fine otherwise.

Having another issue now.... so here is what I did from the beginning: started at stuck 1.7.1, revision 144 1 - GWM - usb. success, horn/lights showed up in fordpass 2 - APIM - usb. success - sync revision went from 144 to 244. can schedule updates multiple days now 3 - TCU - usb. success...

Still stuck here... Sorry that I'm such a newbie. Anyone?