Search results

I am also looking for a screenshot taken from a Sync 4 8in Android Auto. If anyone has the 8in screen and willing to take a screenshot here are the instructions. Thanks. https://mashtips.com/take-screenshot-android-auto/

I have another post about my experience with this. https://www.f150gen14.com/forum/threads/android-auto-turn-by-turn-in-gauge-cluster-incorrect-distance.8497/

I have a "2" in the location as the default. Full row is 7D0-01-02 2300-C62B-99xx

Does anyone know what the technical specs are for the sync 4 screens? I am working on a project related to Android Auto and I can't seem to figure out what resolution and DPI the Sync 4 12in screen is. From this image (capture through one of those CarPlay AI boxes) it appears the resolution...

Yep, Just used CarPlay. Same result. Doesn't really bother me, but just wanted make sure it wasn't just my truck.

With my update to Sync version 21281 Rev244 I get the large turn-by-turn direction large in my gauge cluster using Android Auto. I always had the little arrow at the top. I was using it for the first time day an noticed that anything between .5-.1 shows as 0.0 in the cluster. When I get into...

I feel your pain. I though my update would never take. Like other users have mentioned you could try fresh again by taking out the USB and cycling the ignition and putting the drive back in. I took the route of just waiting. It took two days before my first one would take. Keep us updated...

I had the same issue with my APIM the first time (I had two APIM updates so far). My issue was my battery was to low in voltage. Do you have your battery power supply/charger hooked up? It might not hurt to drive for 10-15m to get your battery up to voltage. Get home power-down and leave it it...

I can confirm this exact issue with my recently updated APIM to SYNC version 21281 rev244 and updated IMPA.

What box did you get? With my updated sync version to 21281 I lost my ability to use my box. It's an Apple Pie mini 1.0 (UX999).

I also was able to get my Sync version up to 21281 rev244 with FDRS. I now have camera's at speed also based on the following changes. I have a Feb 2021 build. IPMA 706-02-02 xxxB CExx xx-- APIM 7D0-01-01 xxxx xxxx Fx-- APIM 7D0-01-02 6xxx xxxx xx- (Tried it but I lost my camera menu "three...

That is the exact scenario. Dealer tried twice. I got it once I figured out my voltage was to low to complete the update.

Great write up. I updated my APIM with this exact setup. @iceman77 I would recommend adding a good quality power supply to the requirements. I found my voltage was dropping to low and the update wouldn't finish.

Great you got it working. Where did you pull those config files from on your PC?

Ok, I hot the APIM to update after the third try. I am now on 21146 Rev 145. I tried to update he IMPA and I can't get it started I got a these messages both times I tried. "Reprogramming Failed" (Click "no" the second time) and then got the "Security access failure". Thoughts? I moved...

Well I got my VXDIAG in, purchased my two day FDRS license. I decided to update my APIM first. Everything went fine with the VXDIAG device. Downloaded all the files to the flash drive. Started the truck and the update began. After about 15-20 minutes I had a message "Restart to complete update"...

In the process of setting up my VXDIAG/FDRS. Is this the place you need to make sure you have J2534 selected so it's not in VCM ll emulation?

General question in regards to FDRS updates. I see that I have updates on many modules. Do I need to do them in a particular order?

I was playing around with the Bezel diagnostics. (Steering Wheel Next track + Radio Controls Next Track) I found if you go into the APIM section and view the "Configuration" section it shows all the AS-BUILT data in easy to read format. Cool way to see if the FORScan changes have taken affect...

What i your revision for Sync 4?