Search results

any advice on how to run the zip ties. I can find the tabs they mention but do not see holes to route the zip ties through.

I have noticed that my CarPlay will disconnect quit often but ONLY when I am on a phone call. If I am using CarPlay for streaming music or navigation, it is fine. But anytime I am on phone call it will disconnect and reconnect. It may take 2 minutes, 3 minutes, or 5 minutes but it always...

That’s what I thought as well

gotcha..... makes sense.

I see these wheels come in 0mm offset and +12mm offset. I wonder how much the 0 offset protrude...

See you no long have these wheels but do you remember what offset you went with? 0mm or +12mm?

Looking at these myself. 0 offset?

Thank you. Hopefully those updates will get dropped for me soon. Thanks again!

Can I get an update on mine now that some updates were completed? 1FT6W1EV3PWG50077

Well, just to see if it would work, I reset the IPC address back to stock (a 2). Same results. Would change to 24 hour clock but not save when coming back to the truck. It would display it was set to 24 hours in settings but display in 12 hour mode. I then went ahead and did a full system reset...

Looking back at this, I don't really understand what the DTERC descending and DTERC ascending/descending means. DTE = distance to empty I believe? I think I will change out to a 4 which should be DTERC descending for 24 hour clock. TBH, I have no clue.

on a brand new frunk speaker from pin to pin I get a resistance of 298 Ω. Can that be correct?

Just an FYI for others. An Intel based MacBook works just fine with FDRS and a Mongoose. I used Bootcamp to instal a fresh copy of Windows 10 and just installed the rivers and FDRS as normal. All works just fine.

Well, I just checked it and there was a 0 at the specified location. I guess that makes sense since I did do that with FORScan however prior to the module updates my 24 hour clock was saving and being applied every time and now it isn't. I wrote the C to the specified location and will test...

Well, my 48 hour license has expired :( Seems like it will have to wait until more updates are available so I can do some updates while I have another license. Maybe the powertrain updates will drop soon.

Yeah, I am just learning this stuff. I will try both C and E and see what happens... Another question. Maybe some on my configurations didn't "take" during the module updates? Is it better to: a) run the configuration again for a updated module in FDRS, or b) run PMI for that module again...

@rugedraw I had previously put a 0 there to disable the door ajar chime. looking at your picture, that doesn't seem to make sense now. not sure where I previously found that info. but I also see it is for an engine/ignition on chime so maybe that does make sense? I am not sure if EIOCM relates...

Thanks! I will give it a try.

After doing some updates over the weekend I have noticed some of my settings do not stick. Specifically, my clock. I am in the military and like to have my clock set to 24 hour clock. I noticed yesterday the clock displaying 12 hour clock time (AM/PM times). I went to the settings and 24 hour...

I really wish you were closer. Would love to have this.