Search results

Yes, I believe it was enabled due to my Tow Tech Package. The bed lights and parts shown will work without ZL. You also get a nifty switch.

They will work, I believe one of the others on this forum did the install without Zone Lighting and it worked. I just don't think you will gain "Zone Lighting" by installing them. The setting you toggle in Forscan is for Bed Lights, I didn't enable anything seperate for Zone Lighting, they just...

I world highly recommend the OEM parts. The LED color matches the rest of the truck perfectly. You are not saving much money by trying to go generic, below was my invoice. Not to mention Zone Lighting integration, built in switch.

Tailgate assist is not missing. As described here by others, it is just a super vague crappy description of a device that assists in lifting the tailgate and making it easier to close. Having accidentally dropped the unhinged tailgate on my finger I can assure you it works. I, too, don't have a...

My frunk works 100% of the time from the keyfob and the inside button of the truck. The frunk will open 80% of the time with a push of the button on the frunk, it will close 25% of the time with a push of the button on the frunk. Slightly frustrating, my truck goes into the shop tomorrow for...

That one replicates a keyfob and it protrudes out the side, FYI. I will be installing the Securicode keypad. I found the correct trim piece but the keypad is out of stock everywhere I've looked and I'm not willing to pay outrageous prices on eBay.

Before you start buying parts, I'd reach out to your dealer/service center and get quotes from them. (That will also show you whether or not it's doable)

I don't Tow often either. I got both the Tow Tech and Max Tow for reasons other than Towing. I think it is possible, however, you will need to utilize Forscan. It also would have some deficiencies that might frustrate you. For example the 360 view will still come up by default and would be...

Did you custom order, or is this an abandoned order? If you ordered it did you forget to add the Tow Tech Package?

That will also finally give me the motivation to install my floor anchors for my mats.

Yeah, I've installed a bunch of subs in my time. I plan on using the door tracks, I was wondering where to tap through to the frunk (more specifically the space where the LVB is). I'm using 6 gauge wire, I think 8 was recommended (based on the specs) so I usually go a gauge bigger than...

So... My wife got me a birthday present. My 10" JL ACP110LG-TW1 arrived today. Will be installing shortly with a Keyloc. Quick question though...where is the best place to run the 12v wire into the cab from the LVB?

https://accessories.ford.com/products/f-150-2023-charge-port-weather-kit-for-bev-lightning-only Here's what the Ford part looks like:

Reread the thread, a temporary solution has been discussed here and in countless threads.

The update bug is also being fixed in February from what I heard. Ford set too high of a threshold needed on the LVB for updates to occur. That should solve that need for disconnecting. His install is clean and I'm in no way knocking the disconnect, I still have it on my old Ranger. I was just...

It's only affecting 2023's and will be fixed in February.

For what it's worth, the issue is with the truck, not the FordPass app. Also, it's mostly (maybe only) affecting 2023's right now. That's probably why it's not bigger news...only a few of us are experiencing it. My guess is the modem is locking up, which is why the 12v negative pull is a...

Yeah, you have to make sure the battery actually takes a charge. If you plug it in and the battery is full it won't set up a new place.

The frunk is going to happen everytime, it loses track of where it is. Just slowly lower it until it latches and you're good to go. The 100% charging issue had happened to me once (I've had this problem since December and have disconnected 5 times). To fix that, erase the charge location you...

It's a great accessory on most trucks! It will become almost useless though once Ford fixes the modem issue... The HVB constantly monitors and tops off the LVB. There isn't the same concern of leaving these trucks sitting and having the LVB go bad from a slow drain.