Search results

Let me ask it another way... have you done any FORScan changes?

That does NOT pertain to their issue. The IPMA has been cleared back a few posts ago. Don't need people doing these things if it's not necessary!

Did you make ANY changes to the IPC using FORScan?

Right there with you... I had them do only a single change...

Please look at what I posted... your FORScan changes could be affecting the update. The last line stays only the first one I posted gets changed. The last 2 of the last block will get recalculated if it's wrong.

I hope no one is doing that...

Can you change the values back to what the originals ones were? If you don't have them then try this as last resort. 720-01-01 2F0A 1064 F4CA

Did you pull the USB stick out first? Or did you mean the update no longer appears in the SW tab?

And as I said to @Skier167 you as well as he will have to fail the update and go the CANBus route Also, have you made any IPC FORScan changes and if so, which ones?

Have you made any IPC FORScan changes and if so, which ones?

That's not a corrupted module, you have a DTC. Can you provide us the DTC it's showing?

That's the dealer he's going to... :LOL:

Try @JEB 's way first but I'm betting you may need to fail it and push the CANBus route and let it force it

change the 8 8A50 A218 AE51 to a 5

He shouldn't have to, it will see that his USB went fine if it actually did...

@Skier167 What are your settings for 706-01-01

Don't forget the IPC has 2 updates, the first a USB and second the CAN Bus... configuration is done in the CAN Bus update... let's see if he replies to the IPMA first

My doc tells you how to kick off a CAN Bus update but, be prepared to be there for a bit.

You mean the IPC? There is no ICM.

lcm?