Search results

That could be it, I am glad they added it. Yes, those softstart systems came up on my search, they need to be wired into the AC unit itself and not the outlet. I haven't had the AC trip again once I started turning down the temp demand sensor to 75%. If I find that it trips in future I will...

I purchased this unit - the more expensive 20 amp version - and returned it. It didn't say in the description but the card you are holding that was in the package said it will not work with air conditioners. Which was the whole point of my purchase so I returned it. I found that turning the...

Installing an inverter is not a big deal, I had a 2500W inverter (linked below) installed on my previous truck and it worked fine for small draw items. I could NOT run a microwave for instance and needed a second house battery added to buffer the initial draw. When you add the bulky inverter and...

You did a much better job than I did! I like that location for the amp controller.

Hello @Livnitup, my 21 PB has Max Tow and is a Lariat with the power mirrors. I have the lane centering system, BLIS and radar cruise as well. The only thing I don't have is the 360 camera package. Since I have the max tow and lane centering and power mirrors with BLIS, do I already have the...

One more thing worth mentioning. The controller sits in engine bay where it gets HOTT especially since my PB idles a lot (use the generator a lot) in texas summer heat. I am sure it was heat protected by design, however, out of extra caution, I wrapped it up in anti-heat tape. Either the length...

The SMART is exactly the same as the regular except a Bluetooth capable ODB controller. And you download AMP's app that talks to the BT OBD controller. The app is incredibly dumb. It lets you deploy and retract the steps from your phone and I cannot think of any useful real life situation where...

Inspect the package contents once they arrive to make sure they are what you ordered. I ordered the XTREME steps and on the outside of the box it had XTREME part number but inside of the box had the "SMART" steps (XTREME has dual motors on each side smart has just one). SMART is a total gimmick...

An update on this. Since making this thread, I have had two more days at the track pulling the same loads off the generator without issue. All good now and here's my setup that's working well: First thing I did was turn the temperature of my overhead AC to 80% - it was originally running at...

OK I installed the AMP ‘XTREME’ power steps today. They seem to be back ordered at most places, but P3 Performance Products had one in stock for me, shipped it quickly and it arrived within 3 days. Install is pretty straightforward, except a few minor areas to watch for: Unlike previous year...

I have had 3 tonneau covers in various trucks over the years and here are my thoughts. I believe #1 is the most cost effective option while #2 and #3 are about the same (#3 may be just a few hundred more?) Soft folding roll-up cover. Pros: easy to roll-up and does not obstruct rear view when...

I went up a few sizes in tire size on my 21 Powerboost and used forscan to recalibrate the speedo. Just a few clicks and you are done, pretty easy to do. Look in the forscan thread.

I use the viair portable compressor listed below. Always sits in the bed of the truck, have had it for 5 years and still works like a charm to air up big KO2s (minus some surface rust on the base of the compressor). When choosing an air inflator/compressor, the speed at which it inflates a big...

I did have trailer hooked up And truck in my driveway. I have not tried 726-02-01 I will try that next thank you.

OK changing this to 00 had no effect and my alarm still went off yesterday with truck parked in the open. Anyone know where the sensors are, that I can tape up? Is the alarm being set off by internal motion sensors or external sensors?

Yeah hell no! I am not going to be polishing and fussing over truck wheels. If the chrome falls apart, I will just get them refinished in a few years or swapped out.

Anyone?

I did split the tire warmer and AC across the two circuits, and verified the draw on both meters in the truck's screen. I am using this on the truck's 240V receptacle and then connecting my 12 gauge / 10 foot to one of the two ends for the trailer shore power: Amazon.com: Cable Matters...

Thank you for your suggestions. The longer extension cord you see is running out to the motorcycle for warmers which has a low draw out of the 110V outlet in the bed. The AC is plugged in via a 12 gauge 10 foot 15 amp extension cord. I like your suggestion of uprating the extension cord for...

Hello, Picked up a 21 PB last weekend and have it out at the track this weekend. Running a Dometic overhead AC in the trailer (connected to the 240V 4 prong) and a set of tire warmers (connected to one of the 120V outlets). Here is my issue: AC compressor will cut out frequently when running...