Search results

Sorry to revive this. I am running into the same issue - did your squeak go away? What was the fix if you don't mind me asking. TIA.

Last update hopefully. Looks like I have managed to fix it. I took apart the sideview mirror and cleaned all the contacts with alcohol and the camera(s) are working again. I am hoping it stays working. Thanks guys for the assistance.

I wanted to give an update. Thank you to @Jesse-Infotainment and his guidance. I disconnected the right camera coax from the pillar and my cameras are back and working. So it looks like there is an issue with either the coax cable or the camera. I didn't have much time to test this morning...

I did disconnect the camera and tried without success (removed the coax). Any other thoughts?

Thanks @RLXXI. Appreciate the insight. I was hoping someone may have seen this error before. Can't find much on the interwebs for this short issue. I've reseated all the cables and checked them near the IPMA without success. Not sure if it's near one of the cameras. Stupid that a short can knock...

Hi all. Last week, I was in the truck and parking. All of a sudden I received the error below on the screen after the cameras flickered: After which the reverse camera stopped working along with the rest of the cameras. Parking sensors continue to work. The camera button is no longer working...

I’ve got the same issue after the most recent park aid update. Everything was working. Clicking on my camera icon does nothing. Reverse cam still works. But none of the other ones work. ‘23 Lariat ER.

Got my BC 1.4 update last night as well. Haven't had much testing but did make 1 lane change on it's own after I indicated. Looking forward to testing it more.

I have mounted it to come from the side. I guess you could do it towards the bed but when you flip over tepui the ladder may interfere with the tailgate.

This is what I bought 2 years ago. It also includes the RetraxOne. These were COVID prices so very inflated (CAD$): 1 x RetraxOne XR - T-60378 $2,080.00 1 x Yakima Tonneau Kit 1 (Retrax XR Series) $274.99 1 x Yakima HD Bar -...

I had it on the elevate racks but that made the tent quite high so I switched to low profile Yakima racks that fit in the t-rails. The tent is now much lower to the ground (approx 6” or so above my tonneau).

I purchased the following cord on sale from Amazon 2-years ago and use it at the cottage quite often. No issues. It's a heavy duty cable. https://www.amazon.ca/gp/product/B085HNNQHD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Speedy recovery pal. That install is pristine.

I changed the breaker to a 40-amp to be sure.

I'll open out the outlet next time we are up there to see if the connection is still good. It's a good point, I have not removed the outlet to see.

Nice to emeet a fellow EE however I’m not a practicing professional. The EV outlet is a dedicated circuit. We use the charger sparingly when we go up to the cottage maybe 6-8 times a year and usually only charge the truck once to 100% for our return trip home. My place is old and has the old...

I am not sure. I can't use the Ford mobile cord that I have - it always blew my fuse. It's a 40A charger that can't be dialed down. I have an amproad ev charger that I set to 32A charging which was still blowing the fuses. By adding this panel (no wifi), the fuses, hopefully, won't blow...

I had bought the following during the Amazon Prime days for $120 CDN: https://www.amazon.ca/dp/B0C8HP6NYC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Installed it at the cottage and it has been amazing. I was blowing my 40amp bussman fuses all the time - it would cost me $20 each time I had to...

Nice setup. I have a similar setup with my elevate racks and Thule Tepui tent. My wife hated having to climb down the ladder to go use the bathroom in the middle of the night. I then get low profile yakima rack and put the tent on top of that so it's much closer to the ground and even still...