Search results

Just to close out my OP I was playing with FDRS for the first time and realized the cabin temp and humidity sensor were not being detected by the system. I pulled the cover off and checked the main plug going into the headliner. It was pushed almost all the way in but not quite, and it would...

Sorry for the late response. Just yesterday I purchased a 2 day license to FDRS and updated about 20 modules and then installed the trailer brake controller module, updated it, and programmed. The part number for the under dash module I installed was ML3T-19J295-GA, which was the same part...

I intend to perform this mod following the tutorial above. I installed the lights last year and couldn't get them to work, likely needing these 2 wires. You list several part numbers here such as for the 26 pin housing and receptacle terminal. I'm not sure what those are for, according to the...

I have a 23' Pro ER. Purchased one of the power adapters off of Amazon that connects to the wire connector going to the rear view mirror and provides USB power such as for a dash cam. When I hooked it up, no power. So I tested the black and white wires that are spliced off of the factory wiring...

After more than a week of 6.8 failing to install, even after I charged the 12v batter, I asked the dealer to handle it. I'm overdue for 10k service anyway. They were able to see a slew of error codes my truck has been reporting but didn't throw a CEL on the display. Scheduled for service in 2...

Similar here. Unfortunately 6.8 has been ready to install for 3 nights and it still hasn't installed. I tried hitting install now, no joy. Threw a charger on my 12v battery tonight to see if that does the trick.

It would be nice if Tesla replaced the "Tesla Charging Only" signs with "EV charging only" to make things a little more obvious.

I recently went into developer settings on my Pixel 8 pro and switched Bluetooth Map from version 1.2 to 1.4 My wireless connection has been much more stable since, I don't think I've had a single random disconnect.

I've had no problems charging at supercharger, only a couple of funny looks. Recently though, even if my one time charge limit is set to 100, the supercharger cuts me off at 90 percent. Really wish there was a way to go to 100, even if there was a surcharge. I like to go places where chargers do...

I started plugging in my 3 week old truck every night, which also happens to be right next to my WiFi router. This is my 3rd update in less than 1 week. Cranking through them.

Confirming this did not work on my 23 Pro ER with Max Tow I reset the modules to factory and tried again, no joy. Also tried with a 4th value mentioned in the ICE forums: whitelightckt None of this worked. If someone with a 23 Pro was able to get this working please PM me with your package data...

Confirmed not working. I found another thread where they activated zone lighting on a Lightning without it. Checked all those values as well and found a single value that was different. Changing it made no difference, zone lightning not working. Looking for as built data of another truck that...

Most likely failure point is me ? I found another thread with some forscan values, tonight I'll mess with it again and double check my work. My rain sensor activated in Sync but this morning it didn't seem to be functional. Not my day lol.

I have a 23 Pro ER Max Tow and the bed lights did not work after installation and activation with forscan. I used the values in the dedicated thread for the bed light mod. Tomorrow I will double check and make sure all of the values for zone lightning from page 42 are set (even though I had zone...

Here is a thread for adding the brake controller. Lariat SR & Ford In-Dash Brake Controller - Lightning Forum I have no idea if one can add the hitch/backup assist but I'm interested to know.

Interestingly, mine was delivered with zone lighting in the app and on the Sync display, and it works from both. It activates front and rear (I don't have side lights yet, I do plan to try)

I have a 23 Pro ER with Max Tow but without any other packages (no tow tech) I just installed the OEM controller and activated the settings in Forscan. Gain shows up on instrument display when I adjust it, no error messages. I have not tried towing yet (but I feel good about it) I did also...

23 Pro ER Max Tow here Installed and changes made in forscan, no joy Hoping we are just missing one additional setting. Would be a bummer to be missing a hardware part.

? This for front and rear emblems

I wouldn't mind putting this on the dash with an extension cable from the console. Free up the console entirely.