Sponsored

Recent content by Crash McBang

  1. 3D Printing Fun

    No idea. Copy and paste your question into the googler and see what it says.
  2. 3D Printing Fun

    Nice color, goes well with the console. I forgot to add that some glue may be needed. I prefer E6000, it's tenacious but flexible. Hot glue may work for a while but after a lot of hot/cold cycles it seems to weaken.
  3. 3D Printing Fun

    Amazon Basics Blue, which does not seem to be available anymore.
  4. 3D Printing Fun

    Second try - my first one did not stick. I got tired of floppy bottles and printed an insert in TPU (rubbery plastic). See photos.
  5. 3D Printing Fun

    Got tired of having bottles rattle around, and no STL was forthcoming from VAL, so I made a modular bottle holder. Attached is the STL and some pictures. I used PLA to print and a bit of a rubbery adhesive (E6000) to stick the modules together. They wedge into the door pocket and prevent the...
  6. 3D Printing Fun

    nice, I had to pull over today and rearrange my bottles to reduce noise. Is there an STL file?
  7. Battery Maintainer Usage

    Follow the red and black wires through the pictures: - back of solar panel to the passenger side door - door jamb to tiny hole in right front fender - tiny hole in fender to inside of frunk - inside of frunk to underside of frunk shroud - inside of shroud dives into 12v battery area And from...
  8. Battery Maintainer Usage

    The panel comes with a long cable, which is tucked along the door and under the hood. There are quick disconnects from the cable to the battery so that the panel can be unplugged from the battery if needed.
  9. Battery Maintainer Usage

    I found I did not drive the truck as often as I thought I would, especially in winter - it sits outside, so I added a Sunapex 30W solar trickle charger and mounted it low on the passenger side of the windshield on the inside, so it does not interfere with the airbag. Even on cloudy days it keeps...
  10. Park Brake Failure - Service Immediately: fix #9

    Resolution: C/S: PARK BRAKE FAILURE SVC SOON APPEARED ON DASH WHILE GOIN G DOWNHILL AT ABT 30MPH. ECM CODE 874496 UNABLE TO DUPLICATE COMPLAINT-PERFORMED SELF TEST,C0609-CD OASIS,NO MESSAGES-PERFORMED PPT A1,ACCESSED C2015 AND DISCONNECTED,PERFORMED PARK BRAKE SWITCH COMPONENT TEST IN APPLIED...
  11. Park Brake Failure - Service Immediately: fix #9

    Service scheduled for end of January(!), will post resolution then, if any :cool:
  12. Park Brake Failure - Service Immediately: fix #9

    From BlueDriver: Odometer: 16,825.984 miles 1 Engine Control Module 874496 No description available 0 Confirmed Codes 0 Pending Codes




Top