3D Printing Fun

[Crash McBang]

I found out about the lack of spring-clips in the rear way too late, and also saw them way overpriced (and not that many available, regardless).

I'd be content having a silicone insert for this. I thought I read a vendor mentioning it on the Gen14 forums (that they were considering it), but at least when I read it, there wasnt much user response.

Yetis/sport bottles clank around too much in those rear behemoths.

Sponsored

 

[svt54]

It looks like polymaker pop blue ASA is either discontinued or extrememely popular as I can't find it anywhere? Anyone have another ASA that is close to Lightning blue?

I am thinking one of these, but not sure....

https://www.microcenter.com/product...ard-spool-vibrant-blue?utm_source=chatgpt.com

https://www.matterhackers.com/store...ment-075kg/sk/MS7TUFAM?utm_source=chatgpt.com

https://kb-3d.com/store/ambrosia/13...259-ambrosia_filament_colors-terrestrial_blue

 

[Crash McBang]

I found out about the lack of spring-clips in the rear way too late, and also saw them way overpriced (and not that many available, regardless).

I'd be content having a silicone insert for this. I thought I read a vendor mentioning it on the Gen14 forums (that they were considering it), but at least when I read it, there wasnt much user response.

Yetis/sport bottles clank around too much in those rear behemoths.

Second try - my first one did not stick. I got tired of floppy bottles and printed an insert in TPU (rubbery plastic). See photos.

 

[Crash McBang]

Second try - my first one did not stick. I got tired of floppy bottles and printed an insert in TPU (rubbery plastic). See photos.

 

[fvineyard]

@Crash McBang What brand TPU did you use? I like the color.

And thanks very much for the STL file

 

[Crash McBang]

@Crash McBang What brand TPU did you use? I like the color.

And thanks very much for the STL file

Amazon Basics Blue, which does not seem to be available anymore.

 

[Crash McBang]

...and done. May have to add a drop of hot glue to the bottoms to keep the drink cup/bottle from pulling them out.

Nice color, goes well with the console. I forgot to add that some glue may be needed. I prefer E6000, it's tenacious but flexible. Hot glue may work for a while but after a lot of hot/cold cycles it seems to weaken.

 

[fvineyard]

Nice color, goes well with the console. I forgot to add that some glue may be needed. I prefer E6000, it's tenacious but flexible. Hot glue may work for a while but after a lot of hot/cold cycles it seems to weaken.

Is the E6000 a good replacement for the now unavailable Homax All Purpose Welder Glue?

 

[Crash McBang]

Is the E6000 a good replacement for the now unavailable Homax All Purpose Welder Glue?

No idea. Copy and paste your question into the googler and see what it says.

 

[ka-chow]

Anyone still have this file? Looks like it’s been removed

This is a good one. At least for me. I wanted to have MagSafe charging for my phone (since I have the XLT and no wireless charger). I saw there is a company that makes an XLT charger, that goes in the cubby under the dash, but I didn't like that it layed flat, so I designed my own. I also gave it some storage for my wallet, since I use a MagSafe wallet (with my custom "key fob card" that I will post more information on when I get it in Thingiverse). I put all the details in the Thingiverse description including the MagSafe charger I purchased and the right-angle USB-C adapter. Hope somebody else enjoys this one (as it took lots of prototypes)!

F-150 Lightning XLT MagSafe Charger and Wallet Storage by Dpetricca - Thingiverse

 

[Lightcan]

Hello everyone,
Does any one have 3d scanner or iPhone with Kiri engine or poly can app (3d lidar scanner app for iPhone) ? I need 3d scan files or 3d model for frunk left and right plastic fender ledge covers .
I will print them
Fender Ledge Cover
NL3Z-5802038-B and A

Sponsored