Recent content by UncleTony

This is the same one that is featured in the @branden video.

Did you purposely find the ugliest picture possible? 🤣

I am going to make the case available on thingiverse once my account allows me to upload. (New account) so you guys that are able can print a replacement if needed. I have been using: Siraya Tech Fibreheart ASA-GF Polymaker ASA - Pop Blue I will revisit the design and see if how to improve it...

I print the case myself is why I was asking. The original case was made from normal ASA, the newer cases use Glass filled ASA, which has locked in place well enough I haven't been gluing them. But if they are splitting apart, I need to change them so they stay together properly. They are press...

Did your coupler case come split like that? It looks like it is starting to separate on the edge.

Selling my mObridge K2 8.1.1 Channel DSP Amplifier A2B Plug-N-Play Kit, pulled from a 2024 Ford Lightning after about 6 months of use. It still has my tune on it and the speaker offset is still programed for a crew cab F-150. I had it installed with Power bass OE door speakers/tweeters and a...

The PZ1P works fine. My errors were unrelated. The only note now is that it is non motorized.

You have to put it in offroad mode to change the model

You would need to setup an open pilot dev environment to view the logs. This can help you get started. https://github.com/sunnypilot/sunnypilot/tree/master/tools Not to discourage you from going down that route, but its only $100 for a new harness and you can return it within 30 days if its...

If the road cam stays on the screen, it is likely falsely detecting ignition like you are thinking. My first guess would be your harness or harness box is having an issue.

Does the comma go offroad when the truck is turned off? Or does the road cam stay on the screen?

That is JX6P. Looks like from a 2018 Focus. If they had it listed as LX6P, I'd ask for a refund.

Interesting. What did you see with it plugged in? Was it an OEM part?

Those that are doing the retrofit: You may need to lightly file the top corner of the dock for the coupler to seat all the way down, that spot has some support marring that can cause it to not seat fully. Don't go too aggressive, it takes maybe 3-5 strokes of the file to get it right. The thin...

Do you have the dock from @Ajzride? I can send you the dock integration version as a replacement so you dont have to use that male to male adapter.