Search results

thats the one i would have expected to be easy, and or should work even with the other half of the HVAC not actually working to provide heat/cooling I had made necessary changes to SCCM, IPMA, APIM, and HVAC to enable HSW but currently no dice, also verified that I do have good voltage coming...

Just another update, had the parts and the time to mess with HSW and installing HVAC unit getting that installed and configged. In regards to HVAC module, lightning seem to have a distinctly different firmware (and or potentially config). You cannot use the same parts as ICE vehicles for any...

Small update got my parts from mouser in today, Partum's for C311/C312 pins fort he center row the ones 2.8mm wide seem like a exact match same size and even same numbering stamped on left and right sides of the pins. The partum's for the 1.5mm pins from C311/C312 I listed in the...

Don't mean to keep putting out random updates, but all parts ordered hoping should be able to start next weekend. Updated spreadsheet in first post with more details, pin part numbers, estimated wire runs, and what I ordered. I also uploaded PDFs of all the plugs I had looked at or talked about...

if you look at my spreadsheet the pins for audio are referenced, the question there would be is sourcing the right feeds for these, and or if they exist in your harness I think more likely in lariats or a system that already has the B&O system adding that from scratch likely prove more difficult...

Quick Update check original Post for more detail on wiring and updated spreadsheet coming pretty close to having all wiring sorted front seats pretty straight forward, 3 wires from the passenger kick panel, 2 would use taps for canbus and then slot a new plug into C265 (which will be nasty to...

oh you don't have a new hvac control with a physical button?

do you have the wires ran and the proper clockspring for the heated wheel, along with the necessary forscan changes?

oof that turned out more blurry than i thought but plug lower left and control box center are found on the left rear back of the bench seat (behind driver) is that the heated seat plug for rear bench or is it something perhaps audio related i know higher trims have a sub behind the seat. I...

I don't think ford would push a OTA that reprograms the HVAC module, Someone could correct me but I don't think they really do the module programming that we do in the like of forscan over the air. For instance keyless entry you even have to fully flash the firmware of the door module no way...

Reserving for additional write up, most likely this will cover actual steps/pics of the process

Hello, Been a lurker long enough and figured its time to start contributing :) bear with me adding content here in stages This will likely be a living evolving post I don't have all the answers just yet so bear with me, but I plan to come back and keep the first 1-2 messages documenting the...

i don't think its anything crucial lol, It jsut puzzled me where that christmas tree went and I looked all over the body, then it clicked that it fit that hole perfectly (also less stuff to rattle around) If i was more nosey i should have pulled a lamp out of a loaner ICE F150 i once had and...

sorry remembered this but tried to pull my light but the linex added thickness made is super annoying to pull the lamp back out and i didnt want to force anything but you can se the post with the Hole in the OP's post i circled it. basically the top Christmas tree plug is a strain relief that...

i can try and grab one with the linex the lamps were a pretty tight fit, so I'm hesitant to pry them back out. I wasn't thinking I should have snapped a pic before snapping them in. But also no issues with install/enabling them on a 22 Pro tow tech/max tow. Super simple like 15 minutes to...

As a FYI the Christmas tree post on the side of the wire that plugs into the lamp goes into the hole that is on the lamp itself. It's a strain relief so any vertical pull is on that rather than the plug. My laptop decided it needed to update for a insane amount of time will report when I get...

sorry didn't see the reply if you still had them i would be interested still, depending on how nutty shipping may get.

Thanks, found the location/plug was harder to decipher from the picture its quite tucked in there. here is what I have in my 22 Pro TT, MT Based on this and if I read past post and crosspost from the ICE forum I "think" my vehicle would be good to go correct? (aside of bumper harness ofc)

Maybe its wishful thinking but was trying to find a a reader/tuner compatible with Forscan and ABRP? wanted to start dabbling into some of the modding/tuning of these vehicles but figured double duty with ABRP might be nice. didn't know if anyone happened to have a recommendation or the same...

where is this plug? or i guess the IPMA module? (im less familiar with tracking those acronyms or locations) I can check or add a datapoint for 2022 pro (tow tech +max tow). I was planning to do some investigation for a few other mods while building out part/project list, this one isn't as...