Factory Wheels with Aftermarket Tire Thread

[XenScott]

295 60 Nittos. (approx. 34x11.5)

Sponsored

 

[Cbaka27]

295 60 Nittos. (approx. 34x11.5)

Looks good...are those the stock Lariat Chrome package wheels?

 

[XenScott]

Yes, with a 2.25” level.

 

[Roger1108]

I order the same color PB truck, but with a 6.5 bed... I am thinking I will add a 1.5" lift and drop the spacer in the rear. You have a great looking truck, I am salivating looking at it, lol
I just found out that my truck is coming from Dearborn this week, maybe 3 weeks to get to me? I am stroked now!! Everyone that ordered their truck will get theirs very soon... patience, it will happen

Well, my truck got delivered yesterday, OH YAY, I told the salesmen that I will be over the following day. 3 hours later the salesmen called and told me that during the inspection they noticed a dent in the door. OMG, a 70K truck is damaged now!! I am going to ask for a deduct at the price? Or ?

 

[dannko58]

a youtube video i found...stock sport 20's no level with 33x12.5 ridge grapplers....
look too small for me...he should of went with a 295/60...

yes these 33's are actually a 1/2" smaller than the stock tires. I want 305/55r20 but cannot find anyone using them yet

 

[Gear]

Mickey Thompson Baja Boss AT 255/85r17(35x10) on stock steel wheels. Ready Lift 2” front spacer. Rust oleum semi-gloss spray paint. Zero cutting/trimming.

 

[turbospartan]

Anyone have pics or can take a pic of BFG K02s on the 20" sport wheels, from behind to see how much tire "meat" there is protecting the wheel? Considering 285/65r20 and trying to see if they would provide enough protection to the wheels as far as curb rash, etc.

 

[Jackson84]

295/70R18 nitro ridge grapplers on the factory wheels. It also has a 2 inch rough country front and rear level kit. It sits 1 inch higher in the rear then the front, I wanted it like that as we pull a 6000lb travel trailer often. They mounted and balanced the tires 1st and told me there was no rub at full lock. There was no cutting or trimming needed. I was pleased with the end result.

 

[Manners226]

285/70/18 Ridge Grapplers. No Level (Yet), No Rubbing, No Cutting!

Looks great! Can you post some more pictures of your truck please?

 

[turbospartan]

Anyone have pics or can take a pic of BFG K02s on the 20" sport wheels, from behind to see how much tire "meat" there is protecting the wheel? Considering 285/65r20 and trying to see if they would provide enough protection to the wheels as far as curb rash, etc.

Bump... asking this question ^^^ again for anyone who has K02s on the 20" sport wheels.

Also, can I run 285/65r20 K02s without a lift? Want to upgrade tires ASAP but dont know if I need the 2" lift in front or not

 

[fatmatt]

Anyone have pics or can take a pic of BFG K02s on the 20" sport wheels, from behind to see how much tire "meat" there is protecting the wheel? Considering 285/65r20 and trying to see if they would provide enough protection to the wheels as far as curb rash, etc.

Here's a few pics of mine with 285/65/20 KO2s. No issues to report... dealer wouldn't install them though, said they wouldn't fit...
Edit: no lift/level. All stock

 

[turbospartan]

Here's a few pics of mine with 285/65/20 KO2s. No issues to report... dealer wouldn't install them though, said they wouldn't fit...
Edit: no lift/level. All stock

Thanks! Looks great. Once they were installed - no rubbing, even at full turn etc?

I have a PowerBoost Lariat so not sure if that makes a difference or not.

 

[dhrandy]

Well, my truck got delivered yesterday, OH YAY, I told the salesmen that I will be over the following day. 3 hours later the salesmen called and told me that during the inspection they noticed a dent in the door. OMG, a 70K truck is damaged now!! I am going to ask for a deduct at the price? Or ?

What did you end up doing?

 

[UGADawg96]

Here's a few pics of mine with 285/65/20 KO2s. No issues to report... dealer wouldn't install them though, said they wouldn't fit...
Edit: no lift/level. All stock

I'm still debating 275/65r20 vs 285/65r20 and these pictures look sweet!!!

 

[fatmatt]

Thanks! Looks great. Once they were installed - no rubbing, even at full turn etc?

I have a PowerBoost Lariat so not sure if that makes a difference or not.

I really haven't noticed anything too concerning. Once or twice when I've been at full lock while backing up, I must've heard the mud flaps rub up against the tires?? But no driveability issues.

I have the 2.7. Some pics of the PBs make it seem like it sits a hair lower? @2021f150 ran 285/65/20 Wildpeak AT3s on his PB XLT FX4 w/ no level (page 6 of this thread) and seemingly no issue either so I think you'll be in the clear.

Sponsored