2021+ F-150 FORScan List / Database / Spreadsheet ?

[Nightshade]

does anyone know if we can enable surround sound in non b&o system in forscan?

You can change and enable the surround sound in your Sync 4 screen in options. It'd defaulted to Stereo I believe.

Sponsored

 

[Hackintoshihope]

I just bought the 2021 Hybrid F150. Forscan isn't showing the BCM when it scans. Has anyone seen that?

I saw this on mine as well I think it is called BdyCM right?

 

[wlathan]

I saw this on mine as well I think it is called BdyCM right?

No, not seeing either. The list of modules looks very incomplete.

 

[thomhunt]

No, not seeing either. The list of modules looks very incomplete.

Does your OBD adapter have a switch on it? I don't have my truck yet, but on my 2013 fusion I would get a prompt to switch from high speed to medium speed CAN by flipping the switch, and if I did not do that it would only show half the modules which is what yours looks like. Might be worth confirming that your OBD adapter is fully supported or detected by Forscan correctly etc.

 

[wlathan]

Does your OBD adapter have a switch on it? I don't have my truck yet, but on my 2013 fusion I would get a prompt to switch from high speed to medium speed CAN by flipping the switch, and if I did not do that it would only show half the modules which is what yours looks like. Might be worth confirming that your OBD adapter is fully supported or detected by Forscan correctly etc.

I have the OBDLinkEX. No switch on it. It's the device recommended by the author of the thread.

 

[antho]

@wlathan Are you selecting a saved profile when loading Forscan? if so, it wont search for more modules. Click "no" and it should scan for modules again. If thats the case.

 

[wlathan]

@wlathan Are you selecting a saved profile when loading Forscan? if so, it wont search for more modules. Click "no" and it should scan for modules again. If thats the case.

It's a fresh install on a new computer and I don't have any saved profiles to select. I'll re-install and see what the dialogs look like.

 

[Ruffiano99]

Those sensors are defiantly active all of the time. You can catch them with your phone camera.

To be fair I have not personally tested the connection between the sensors and the crappy operation of the auto dimming mirror. It was claimed that taping over the IR sensor resulted in the mirrors operating more as you would expect and properly varying the amount of “dimming”. Obviously taping over the sensor is not a viable long term option if you want to use blue cruise. I would like to try some IR blocking film on the mirrors sensor whenever I get around to it.

So I put a tiny piece of IR blocking tint over the rearview mirror sensor and it worked. I was going to cover the entire mirror but I couldn’t get it to look nice. It kept showing glue marks through the tint. A pro probably could have made it look right. But instead i cut a piece just big enough to cover the sensor.
Mirrors work as they should now. Problem solved.
This is what I used, XPEL Prime XR. I went to my local tint shop and they gave me a scrap piece for free. Its an 80% tint.

 

[ROBB1]

So I put a tiny piece of IR blocking tint over the rearview mirror sensor and it worked. I was going to cover the entire mirror but I couldn’t get it to look nice. It kept showing glue marks through the tint. A pro probably could have made it look right. But instead i cut a piece just big enough to cover the sensor.
Mirrors work as they should now. Problem solved.
This is what I used, XPEL Prime XR. I went to my local tint shop and they gave me a scrap piece for free. Its an 80% tint.

Perfect! That is on the mod list then.

 

[Platinum Peasant]

@Livnitup im getting the Titan 40gal extended tank for my 3.0 diesel (they are clearing it out ?). Anyway to change the tank size in forscan to make the fuel gauge and range correspond?

 

[wlathan]

It's a fresh install on a new computer and I don't have any saved profiles to select. I'll re-install and see what the dialogs look like.

The profile was the fix. It creates a cached profile on startup and my first startup was abnormal. I deleted the cached profile, rescanned and all is good. Thanks for the help everyone.

 

[dre276]

You can change and enable the surround sound in your Sync 4 screen in options. It'd defaulted to Stereo I believe.

i’ve looked everywhere but not seeing the surround sound option in sync4. I had the base sound system but recently replaced the ACM for HD radio. Was wondering if its a forscan change for surround sound

 

[libby2cm]

My gf has confirmed that it is, indeed, the driver side mirror. It bothers me that they only gave it ONE auto dimming mirror.

of course! gotta make that $$!!

 

[Derek83]

i’ve looked everywhere but not seeing the surround sound option in sync4. I had the base sound system but recently replaced the ACM for HD radio. Was wondering if its a forscan change for surround sound

 

[Apbling]

Hi guys. Been watching this forum for a while and finally joined. I did some simple things like Bambi mode and double honk but I was really waiting for cameras while in motion. I haven’t checked for a while but I now see with 3 module changes use earlier build 21 guys can get it? Is there any glitches or hangups with this or is it good to go?

Sponsored