Recent content by Gerstein1989

Only when the headlights turn on at night

I don’t know where it’s documented but I can confirm that if you’re using pro power on board while the truck is turned off if your device is not drawing more than 90 W, it will turn off the pro power.

Those eventually fail and when they do will cause a short. Also the time I saved trying to figure out which wire does what made it worth it for me.

I just used the putco harness and modified it pretty simple to do.

I found it’s easier if you remove the plastic trim around the frunk. When you take the plastic off, the headlight harness is right there

Those updates are out for 22-24, it’s just when you get the ota update. I didn’t want to wait so I went the fdrs route. I have a 24’ lariat and when I picked up my truck in feb my updates were way behind.

Wasn’t it included in a software update for you guys?

Pro power mode already exists. There is a toggle In pro power you have to toggle that allows pro power to work with truck off. It resets every time you turn truck back on. I used it on my last power outage. You have to make sure whatever your using has more than 90wats or it turns off.

Haha. Ya I know. I mean a real dog mode lol

A dog mode would be great

24’s have a different housing not sure about other years

I’ll check what the part numbers are for those as well if you need those. I have to look through my paperwork.

I posted the part number a couple posts back. Here’s the part number. NL3Z-17A605-D It’s pretty easy to do, but I did it differently than she did in the video. I took all the trim off so I couldn’t get all the push pens inserted otherwise you’re gonna have loose hose under some of the paneling...

I have a 24’ and it works great. What’s crazy about glare free you don’t even notice the high beams turning on. I think they gradually turn on as when I was testing them I didn’t even realize they were on and then I pushed the stock and low beams turned on. The technology on the headlights are...

This is the rubber housing I put the wires through. If you do it this way you cant see the wires and it looks factory.