Search results

Check out this post. I haven’t had a chance to really narrow it down as I was working on a few different things at once. Maybe this weekend I’ll get time. Also, I have a lariat 3.5 eco, fx4, crew...

My sync version is the one pictured above 21146 revision 145 . I am on power up 2.1.1, but power up and sync version are not the same thing. Power up is the updates, but may update more modules than just sync, if that makes sense.

Did you get it to work on the main display (I.e. get up to speed and then push the camera button)? Mine works, just takes up the whole screen. This is at 19 mph. The second picture shows my sync version too. It updated to this version before my cam would work at speed. It went to this version...

Looks great and matches your house. I think the rake looks good, for some reason when this model has less than an inch of rake, they look nose high. Probably some visual trickery with the body lines.

Canadian, I have yet to go back and find out which ones actually enabled. I changed several values but some are relating to trying to get the side card view working, but below are the changes that I have made. My plan is to go back and take one away one by one until I know specifically which...

Tighten the U-bolt nuts in a cross pattern in 4 stages. Torque : Stage 1: 30 lb.ft (40 Nm) Stage 2: 59 lb.ft (80 Nm) Stage 3: 89 lb.ft (120 Nm) Stage 4: 111 lb.ft (150 Nm)

Not sure what the rake is on the 2wd, but think a front level with 34s would look great. If you wanted a little higher you could go with a thicker leveling puck and add the 4X4 blocks on the back. That would basically get you a leveled 4x4 look without all the extra expense of a true lift.

I have several thousand songs on my usb in my truck and they play fine, with no issues. I like the USB, because I don't pay for any music services other than amazon (just because I have prime), but to go through and add all of the same music, would take weeks. The free spotify/pandora etc...

I am dreaming of a day when I wouldn't need dash cams, or could even leave my doors unlocked like I used to. People suck.

Looks great. I think that’s the perfect size for these trucks. I’m assuming no level kit? I was looking at 275/65/20 but the extra width on these look great.

Well, one step closer. I can now look at the hitch view and bed camera in motion. Unfortunately, I haven’t figured out how to get the side view rear cam to work. I have added the bed camera tile on the side view, but no image there. Maybe it’s one of the IPMA changes that @Jesse-Infotainment...

I like 34”s no matter the rim size. I like 20” rims with street tires (Michelin LTX etc) and 18’s with AT (AT3’s etc).

That sounds really plausible as my truck sits in the garage most of the time. I just happened to drive it today, and noticed the APIM software had updated. I theoretically could have 2 OTA updates go through and only cycled power in the truck once or twice.

LOL, I think we all agree that the F150 is the most annoying to program. My wife's car took 3 seconds.

weird. My APIM software is now showing 21146 Rev 145, but it did not show that until the PU 2.1.0 update completed. Keep us posted, this is great info.

I always use the motor programming version. I never have luck using the remote. First, I always clear all the codes, even if new; as it couldn’t hurt. Put motor into learning mode, then hold the button you want for two seconds…release for about 1-2 seconds…then hold again for two seconds and...

What’s the NEW hitch view? I added hitch view to my APIM. Granted I can’t use at speed, but I can select it, where I didn’t have the option before.

I’m not positive but pretty sure they will. I believe on the other forum there were F150 guys buying and putting on the F250 Tremor boards. They are made like raptor boards without the “raptor” stamped in them.

Not that I am aware of; I just know on the previous F150's the one change was to convert to line level going to the sony amp (if you had the upgraded system), the next step was to flatten the EQ. You can flatten the EQ in the '21, I am just not sure yet if that will mitigate the roll-off. No...

Try flat eq in forscan, ACM module EQ section on the spreadsheet.