Console to Steering Column Shifter Conversion - $800 Pre-Order

[BurritoGrande]

LOL -$800!!!

https://infotainment.com/shop/inter...o-steering-column-shifter-conversion-upgrade/

Sponsored

 

[Rlevans]

OK I never cared for the overly complicated console shifter and switched mine out for the rotary as soon as I could, but this seems dumb to me.

Did somebody have Marty Mcfly pick these up when he went back in time ?

To each his own, but a big clunky club hanging off the steering column that is basically the same electronic switch ?

Do they sell manual locking hubs and an add on transfer case for the front as well?

We don't have to do this anymore.

 

[RocketGhost]

I've never been a fan of column shifters. They just seem archaic. Especially now that shifting is electronic and you don't need anything to move - buttons would work just fine. I like a console shifter, it's easy and mindless and it's what I'm used to. I prefer not to reach for something like buttons or a dial on the dash.

I haven't had any problems with my shifter but if I do I'll just have Ford replace it since they updated the part and the new one shouldn't be a problem.

 

[halfbakedenchilada]

I've never been a fan of column shifters. They just seem archaic. Especially now that shifting is electronic and you don't need anything to move - buttons would work just fine. I like a console shifter, it's easy and mindless and it's what I'm used to. I prefer not to reach for something like buttons or a dial on the dash.

I haven't had any problems with my shifter but if I do I'll just have Ford replace it since they updated the part and the new one shouldn't be a problem.

I've got the upgraded shifter, and I *think* it's the same, or very very close. The replacement started out feeling pretty solid, but is clunky again and makes a click when I put it in gear ... it's so frustratingly cheap and over-engineered. I've ordered the stuff for the rotary shifter conversion (but I will miss resting my hand on the stock shifter).

 

[The Weatherman]

I've got the upgraded shifter, and I *think* it's the same, or very very close. The replacement started out feeling pretty solid, but is clunky again and makes a click when I put it in gear ... it's so frustratingly cheap and over-engineered. I've ordered the stuff for the rotary shifter conversion (but I will miss resting my hand on the stock shifter).

You’ll be surprised how quickly that ‘miss’ goes away.

 

[halfbakedenchilada]

You’ll be surprised how quickly that ‘miss’ goes away.

Ha, I am sure you are right! I will find a new place, and I'm really looking forward to getting that monstrosity out of my truck.

 

[WXman]

With everything being totally electronic these days, there is no reason why Ford shouldn't have just used a rotary shifter on the dash like Ram has been doing for 15 years. It's mind blowing why they continue to use ancient column and console shifters in their trucks.

 

[Firn]

I like the idea of the console shifter above all other options. I get it is just an electrical signal, but tactically it just feels nice.

That said I despise having a complex mechanical powered system just to send a simple electrical signal, especially one that has proven itself to be failure prone.

I do prefer a column shift over the dinky rotary knob, in fact I MUCH prefer it. At least from a looks and feel standpoint. I sure as heck won't spend $800 for it though, heck if it was the same price I wouldn't even disassemble to column.

End of the day the rotary shifter is simple, easy, cheap, and functional.

 

[Albern]

This column shifter is a much better option than the Mach E rotary dial some people have been retrofitting. More space in the centre console and hopefully another option for 2 wireless phone charging pads that face onto the driver and front passenger - that are easy to reach.

 

[ryun]

Nice! I like that this is an option now. $800 does seem like a lot though compared to the ~$150 or so for the rotary dial. And both of these would involve removing the console shifter I imagine so it's not like you're saving any steps.

 

[JAXLightning]

I want to know what gear I’m in without the need to look so I hate rotary shifters. I like the column shifter idea for the fact that it’s not taking up space on the console. I wouldn’t pay $800 for it personally.

Sponsored