Factory Photo Show Added work necessary?

[Regular150]

So look at your factory photos. Driver's window should be up, and protective plastic in B piller door applique.

In my case, shifter was bad, info from line worker tracking it, you'll see my plastic protection off and the window down for the photo shoot. My thoughts are it needed additional "Finessing" post assembly. Maybe why a 6/6 build didn't get build complete until 7/29.

Sponsored

 

[Gasdz]

Mine was the same! May 19 to June 29. I found a build sheet that said dash was torque stripped and power pedal unit was bad.

 

[Pioneer74]

That picture is taken on the assembly line right after the roll test. The repair bay is offline. The truck won't go back through that station for minor repairs.

 

[Gasdz]

That picture is taken on the assembly line right after the roll test. The repair bay is offline. The truck won't go back through that station for minor repairs.

My pic info was dated 5/21, built date was 6/29, didn’t get pic until email on 7/26

 

[Regular150]

Mine was the same! May 19 to June 29. I found a build sheet that said dash was torque stripped and power pedal unit was bad.

Notice you still have the blue plastic protection still in place in the Door Trims. Mine had been opened and closed so many times it came off.

 

[Regular150]

My pic info was dated 5/21, built date was 6/29, didn’t get pic until email on 7/26

So this is after the Picture/Electronic inspection bay?

 

[Gasdz]

So this is after the Picture/Electronic inspection bay?

Not sure, I don’t have an insider, just a build sheet from the factory I found in the truck.

5/19 blend and 5/21 pic tells me they just rolled it off after being mostly complete until a new dash could get assigned to my VIN.

 

[Regular150]

At least they didn't let it go out to the customer like that.

Sponsored