Need Help with Deer guard front bumper design

[bc1]

Hello guys. Still working on a design. Now thinking about blue cruise. Apparently it uses cameras mounted up by the mirror looking forward as well as all the other cameras and sensors in the front bumper to work right. So I can't go up to high above the hood and block the mirror camera(s) and same goes for the bumper sensors.

Today I may take a piece of wood 4x4 and hang it off the front with a rope to see how it affects the sensors and go from there. I suppose it may involve moving the bumper sensors and cameras to make it work right along with whatever harness extensions are necessary. Will report back.

A lot depends upon how much of a wide angle view those front bumper sensors and cameras have as to whether or not I can have anything extending out in front past the bumper.

Might just build something and put the front bumper cover over it. Did something similar back in my oilfield days with rig up tandems where we took the chrome bumpers off, put a solid steel plate/bumper with tow hooks on, and then bolted the chrome bumper on for looks.

On the other hand I don't know if moving any of the front bumper sensors would require a recalibration or not.

Let me know if you have any suggestions. Thanks

Sponsored

 

[Oafy44]

Honestly I would just buy a ranch hand bumper - which fits and ice f-150 and modify the middle to fold down to access the frunk.

 

[Cvh8601]

...

Let me know if you have any suggestions. Thanks

My best suggestion would be to up your game on avoidance while youre adding impact resistance. Get a copy of Forscan and a OBD cable and enable the matrix high beams (ford calls it 'glare free'), assuming thats still standard equipment for 2025. The peripheral high beams that this provides, even with oncoming traffic but not blinding said traffic, will give you a better shot at getting some time to brake.

Forscan Thread

 

[bc1]

My best suggestion would be to up your game on avoidance while youre adding impact resistance. Get a copy of Forscan and a OBD cable and enable the matrix high beams (ford calls it 'glare free'), assuming thats still standard equipment for 2025. The peripheral high beams that this provides, even with oncoming traffic but not blinding said traffic, will give you a better shot at getting some time to brake.

Forscan Thread

I looked at a few pages of that thread. Looks like it said something about changing the daytime running lights to run at night at 10% and I'm not sure about the matrix.

I bot a dongle for a Prius and downloaded the Toyota factory version of their service department software. However the dongle had some type of old version of software that kept saying it could be hacked by spyware and I had to override everything to add it. There was no way I was going to add it to my wife's computer and then have it get hacked so I just tossed it. If this dongle will make it through a anti-virus scan then that will work.

I've been driving every night 12 miles of deer crossing country on a dark US highway 56 and some township roads. I have it on manual brights and maintain about 55 mph watching for deer until someone catches up and passes me. Then I speed up and follow them as close as allowable. Its even better if it is a semi truck. I follow using the 2 second rule so if a deer can somehow appear in 2 seconds then so be it. Every day presents a new blood spot on the highway or an ABK (already been killed) deer on the side of the road. Coming up on New moon on Thursday and then 2 weeks till full moon and the rut is on. During the rut I've seen bucks just running wide open day or night and not paying attention to what is to the left or right but they could cross a road at the dead run oblivious to their surroundings.

 

[bc1]

Honestly I would just buy a ranch hand bumper - which fits and ice f-150 and modify the middle to fold down to access the frunk.

I'm still thinking this through to see if everything will still work. I do believe it would be better to buy the bumper mounts from someone and modify from there instead of trying to invent that which may involve buying the whole thing or just a bull bar.

Sponsored