Search results

1-pedal? Is that a carry over from the Mach-E or is there a way to turn that on for the PB that I’ve missed?

We swapped to an EV earlier this year when we got a Mach-E, and we've found that range only matters for road trips. Slow charging to 80% 2 or 3 times a week isn't hard on the battery, and our charge never drops below 50% for daily commuting. For road trips, the hit isn't as bad as you would...

Katskinz seat covers with heaters should set you back about $1800 installed. Tapping into the 12V side of the car is a simple task any installer should be able to handle.

Do you have the SirusXML360 enabled under connected services? When a lot of channels went digital only during Christmas it seemed to really screw up the connected aspect of SiriusXM.

a good repaint is at least twice that.

Yes, but it is expensive.

HALO EFX is a sprayable vinyl coating. It's kind of like plasti-dip, in that it is flexible and removable, but it's vinyl instead of rubber and can be clear coated as well. For paint protection I put down 8 layers of the flexible base and two layers of clear coat. After the clear coat it has...

My Mach-E has Xpel PPF on the whole front end, it was pretty pricey, but has defiantly saved a few big rock chips already. My F150 has HALO EFX spray on protection film. I did a self test of the HALO versus Xpel and felt the HALO held up better against hurled objects (I tested with a CO2 bb...

Yes, I’ve done similar before. Just have to be careful about installing so you don’t chip the finish. Will you be powder coating or installing yourself or having a shop do it? You can also bond them on to eliminate the hardware completely, but there are probably other brands designed for that...

That is certainly what I was expecting. But I drove Houston to Baton Rouge on Sunday night, returned on Friday night. Put the level on Saturday morning, and made the same trip Sunday to Friday of the next week and the number are what they are, no opinion about it. I topped off at the same...

https://www.f150gen14.com/forum/threads/new-recon-grapplers-295-60-20-does-not-work-with-powerboost.6610/

The extra weight of bigger tires are going to be a pretty big hit. There are some threads on the PB with E rated tires, and it is pretty hard to keep the truck in electric only mode, the ICE has to run most of the time you are moving. The electric motor is still helping and cutting the fuel...

I make a lot of interstate trips on I-10 for work. I made the same trip twice, once with the rear blocks removed for a level, and once with the rear blocks replaced and a 2" lift on the front. Weather was roughly the same (stupid hot), cruise control set at +9. The difference between being...

Mine always resets to XM1 if I start the truck within about 30 seconds of shutting it off, like I forgot to roll the windows up or I realized I need to straighten up in a parking spot.

Haven't seen that exact symptom, but definitely having issues with mine as well since Saturday. Push a button to change channels and it can take 2 or 3 minutes to change.

I tried to build and price a Denali this weekend, and Super Cruise is not an available option to add. reading through the GMC website it looks like they are saying Q3/Q4 2022 for Super Cruise on the Sierra. If someone has better information, please share.

Based on the article, it is obvious that blue cruise is ready, the problem is that OTA is not ready. While that is a huge irritation, I would much rather them get the OTA right than brick my truck and having to tow it in for a software rewrite. While it is encouraging to hear that dealer...

https://www.f150gen14.com/forum/threads/wireless-carplay-and-no-internet-connection-message.4805/

Maybe etching with a fine grit media blast?