• Welcome to F150Lightningforum.com everyone!

    If you're joining us from F150gen14.com, then you may already have an account here!

    If you were registered on F150gen14.com as of April 16, 2022 or earlier, then you can simply login here with the same username and password!

Sponsored

【BestEvMod】Let’s do a giveaway raffle on our Mud Flap!

Status
Not open for further replies.

priceb

Active member
Joined
May 31, 2023
Threads
1
Messages
44
Reaction score
49
Location
Western North Carolina
Vehicles
2023 F150 Lightning XLT
Good afternoon. I got these installed over the weekend. It took about an hour. The majority of the time was spent removing one of the factory bolts on the drivers' side. That bolt's clip/nut had come loose resulting in the bolt spinning but not loosening. Once that was resolved the installation went well. I appreciate the fact that all of the required hardware and tools were included. Below are a few pictures of the completed install.

Ford F-150 Lightning 【BestEvMod】Let’s do a giveaway raffle on our Mud Flap! PXL_20231101_183557437


Ford F-150 Lightning 【BestEvMod】Let’s do a giveaway raffle on our Mud Flap! PXL_20231101_183532342


Ford F-150 Lightning 【BestEvMod】Let’s do a giveaway raffle on our Mud Flap! PXL_20231101_183521701



I am pleased with how they look and perform. They have prevented some of the mud splatter on the front doors that have happened prior to installing. Thank you @BestEvMod for the opportunity.
 

RickLightning

Well-known member
Joined
Jan 17, 2022
Threads
70
Messages
4,032
Reaction score
5,122
Location
SE MI
Vehicles
'22 Lighting ER Lariat,'22 Mach-E Premium 4X
While it's nice to have choice, I like the Ford ones with "Lightning" on them. Then we painted it blue.

Ford F-150 Lightning 【BestEvMod】Let’s do a giveaway raffle on our Mud Flap! Mudflaps after
 
OP
OP
BestEvMod

BestEvMod

Well-known member
First Name
Zac
Joined
Jun 7, 2022
Threads
13
Messages
133
Reaction score
138
Location
California
Vehicles
F150 Lightning
Good afternoon. I got these installed over the weekend. It took about an hour. The majority of the time was spent removing one of the factory bolts on the drivers' side. That bolt's clip/nut had come loose resulting in the bolt spinning but not loosening. Once that was resolved the installation went well. I appreciate the fact that all of the required hardware and tools were included. Below are a few pictures of the completed install.

PXL_20231101_183557437.jpg


PXL_20231101_183532342.jpg


PXL_20231101_183521701.jpg



I am pleased with how they look and perform. They have prevented some of the mud splatter on the front doors that have happened prior to installing. Thank you @BestEvMod for the opportunity.
Thank you for sharing, nice shot!
Sponsored

 
Status
Not open for further replies.


 


Top