50/50 view mode doesnt work

[cassu1041]

Lariat 2022

Can you guys help me out?
I tried enable 50/50 view in Forscan with these instructions.

APIM 7D0-01-01 xxxx *xxx xx-- if 1 change to 3
APIM 7D0-01-04 xxxx xxxx x*-- if 0 change to 1, if 8 change to 9

I have smart hitch so there was 8 and i changed it to 9 and camera menu doing this.
Trailer side view when reverse gear selected working normally.

Sponsored

 

[rugedraw]

It is possible that the IPMA and/or APIM need to be at a certain software version for it to work.

 

[cassu1041]

So what i can do to make this work ?

 

[bmwhitetx]

As Javier mentions, the notes on some of these mods indicate you might need updated IPMA software that came out towards the end of 2023. You would have got this update if you had the Front Sensors CSP done for example. Also double check all your values.

DM me your VIN and I can take a look.

Sponsored