Wheel well screws - type and size?

[Marc]

Does anyone know the type and size of the screws used to secure the wheel well liners. I added mud flaps and ended up losing one. I used to go to my local Ace Hardware but it’s been taken over by new owners who shrank the old school hardware section and made it a home goods section.

Sponsored

 

[MaintGrl]

Off hand I don't, front or back wheels? size for the ones that hold the mud flaps on?
I'm washing the truck this morn, (Here at home) Will Check it out for you.

 

[MaintGrl]

Does anyone know the type and size of the screws used to secure the wheel well liners. I added mud flaps and ended up losing one. I used to go to my local Ace Hardware but it’s been taken over by new owners who shrank the old school hardware section and made it a home goods section.

Ya, the ace Hardware near me has loose fasteners, but . . .the design/layout was done by a third grader. As with the PVC fittings.....why would you locate all the elbows, T's, 45's Couplings of different sizes together. SMH.....No, No, NO! All the 1/2" fittings together, all the 3/4" fittings together, all the 1" fittings together...Gr'rr 8am and already peaked, time for 1 more cup of coffee, then washing the truck

 

[Marc]

Thank you it is the screw where the wheel wheel liner meets the fender on the front. It has a wide thread almost like a Sheetrock screw.

 

[MaintGrl]

Thank you it is the screw where the wheel wheel liner meets the fender on the front. It has a wide thread almost like a Sheetrock screw.

I'll get back to you, unless some one does sooner.

 

[RLXXI]

Take one out of the other side and bring it to your local dealer to match up, they may have a box of them on the shelf.

 

[MaintGrl]

Ok, here you go, Hope this is the ones your lookin for...
Will be kinda tough finding that at the hardware store. Replacement may be a - #8, possibly #10 Sheet metal screw w/a flat washer. Looks like 1" long.

 

[RLXXI]

Part# for that bolt is W721172-S442

https://www.tascaparts.com/oem-parts/ford-fender-lower-bolt-w721172s442

 

[Marc]

Take one out of the other side and bring it to your local dealer to match up, they may have a box of them on the shelf.

Take one out of the other side and bring it to your local dealer to match up, they may have a box of them on the shelf.

 

[FlintMobile]

What brand mud flaps did you install? Thank you.

 

[MaintGrl]

What brand mud flaps did you install? Thank you.

Me?, Mine were OEM Ford Lightning Mud Flaps...

Sponsored