jetfixr1
Well-known member
- Thread starter
- #1
If you in the past have ever owned an F-Series truck, you already know that the wiring harnesses aren’t the tidiest. Loose tape ends, poor routing, etc. It never seems to be an issue, after all, this isn’t an airplane.
Today while adding some water to the wiper reservoir, I couldn't help but notice what looks like installation damage on a low voltage harness. No biggie, just wrapped it up with some electrical tape. There was only one expose wire, with other wires showing insulation damage but no exposure. I hope that none of the high voltage wiring is in this condition, which would induce a potentially lethal arc flash or vehicle damage. Here are some pics for your viewing pleasure.
Today while adding some water to the wiper reservoir, I couldn't help but notice what looks like installation damage on a low voltage harness. No biggie, just wrapped it up with some electrical tape. There was only one expose wire, with other wires showing insulation damage but no exposure. I hope that none of the high voltage wiring is in this condition, which would induce a potentially lethal arc flash or vehicle damage. Here are some pics for your viewing pleasure.
Sponsored