Search results

@Platinum Peasant my PSCM is often grey on initial scan and comes back with a subsequent scan. I think sometimes it wakes up slower than the other modules when you first turn the key on. I've learned to be okay with it.

What are your part numbers either in FDRS or from the widget?

Still just the GSM for you.

I believe myself and Platinum Peasant had that error and we changed laptops and it cleared up. uninstalling FDRS and deleting all data and re-installing might work as well. Be sure to release your license before you uninstall.

I can say that my double-honk and cameras in motion don't appear to have messed anything up. But I think the Anti-glare is in the IPC, which is what has caused the headaches, so I would definitely undo those. It appears that if you corrupted your IPC (as I have done) you will have to ship your...

It's probably safe to do it that way since you haven't made the OTA updates yet, but there is a chance something could still be different. You an actually open those ABT files up in a text editor and see what the values were, and compare them to what is in for scan now. There is a utility...

That is correct, and the software P/N for F188 is still wrong, I believe that is why the PMI fails and why the SW update won't show up.

probably need to undo those.

PMI of IPC still fails. Software Part number is still incorrect by one letter (-CPB instead of -CPC) I had a backup of my IPC from stock. I went through every bit and made sure there are no more forecan changes. EDIT: My Forscan changes keep repopulating themselves somehow. EDIT EDIT: It...

i believe the one that hit me was changing the IPC to prevent the truck from turning off after 30 minutes idle in park.

well at least you have ruled that out.

will do as soon as I get home.

i would undo any forscan changes you have.

Yes, the USB completed, and the can did not. After undoing my forscan changes I was able to do a “configure IPC” and the u2100 cleared. So now I have no DTC on any modules. However my part number is still corrupted, and even after a dozen network scans the IPC update hasn’t come back I to my...

I can’t help you with your request, but will warn you I learned today that forscan changes to the IPC broke an OTA update that I installed via FDRS. I had to manually undo my forscan changes to get the OTA to finish.

two hours ago I would have said no. Now I say possible. We’re any of your changes in the gateway?

You are a genius @Bob_Mac. Manually changing my two Forscan changes back and then running configuration (not PMI) followed by a self-test cleared the DTC on my IPC. I can't believe those two benign changes caused this headache. EDIT: However, my part numbers are still wrong. Hopefully now...

I have and I edited my response. I didn't think any of my changes would have been IPC related but they were. I'm going to manually update those registers in for scan to match my backups and see if I can PMI.

Not that I remember. Let me look back through my changes. EDIT: I didn't think about these being in the IPC, but I guess they are. Disable driver & passenger seatbelt minder IPC 720-01-01 xxxx xx0x xx-- Disable Auto Engine Idle Shutdown of 30 mins IPC 720-01-01 x*xx xxxx xx-- subtract 8...