Search results

This is the same version my charge station pro is at.

If you have never re-booted your inverter since getting .34 firmware, then please do so. We found today that it might be causing the issue of the system failing right as the truck begins to deliver power. You have to turn off the dark start battery after turning off the inverter breaker to get...

Please try something...try rebooting the delta inverter one time. I was working today with another person who just had the V34 update, and they had the same issues as you. After completely rebooting the inverter (you have to turn off the Dark Start battery) their system worked again. That was...

You need to see what the M-professional app shows for an error on the inverter to see what is going on. What you see on the charger and truck are just side effects.

I have seen where the inverter can get a low voltage fault. Assuming you are testing exactly the same as when it previously worked, I would just try again. Using the m-professional app while testing the system would give some insight into what is going on. The fault on your charger is just a...

So I tried to go through every setting in both the Iphone and Waze, and I am convinced this is not really implemented in this version despite what the article says. I tried rebooting the Waze app and the Iphone with no luck. According to my app info I have 5.4.0.1.

Has not worked for me at all yet either. It has not worked for me at all either.

Do you have the latest version of the app on iOS? If so you need to completely close and restart the app.

A bi-directional charger shouldn't matter what trim level you use, because it is using the DC bus directly. It will be your best bet to use loads probably up to 9.6kW and possibly 11kW if they are using the PointGuard hardware. The Pro-power is a separate system and comes in the 2.4 kW or 9.6...

So I am very interested in seeing if anyone is successful getting a dealer to fix this. The only updates I have not yet received are 10.3 and VC 1.4, but today I still had Carplay wireless go out (was connected but no volume). The normal quick procedure fixed it like always, but I would like to...

You might have just turned off lane centering with the button on the steering wheel. Thats what happened to me. All I had to do was turn the lane centering back on and it worked again.

There are other solutions about to hit the market. I would wait a bit.

Technically you can use 19.2 kW because the HIS and pro-power can be used at the same time. Would be a complicated setup though.

Personally I think just unplugging and re-plugging in a few seconds is fine even if the white lights are still spinning in a circle. That being said, some people have found a longer delay works better for them. There is no issue with waiting longer. I usually get my system working the first...

I just tested and all my USB ports work fine. I just got this update yesterday.

I am at the same software as you on my charge station so I don’t believe that is the issue. your well pump could be a problem I would definitely try the system with that turned off completely as well as any other inductive loads. It would likely fault if it was pulling more than 9.6kw.

I posted this back a couple of pages ago but there are likely 3 possible causes of your issue (and aren't bad hardware). I don't think yours would be #1 because it has never been continuous. here are 3 things I have seen that would trip off the system within a second after activating. 1)...

Unfortunately Ford CS really doesn't know the system. I can for certain say the following after extensive testing: Fordpass has nothing to do with the HIS system. The vehicle does not need to be on. It is nice to see the screen, but it is not necessary for operation. My test today was...

You should get it soon via OTA. 10.1.1 was my last update until today.

Update: I tested the HIS with this new gateway update. I started with the truck plugged in but not charging. After turning off the breakers, the white charge port light stayed on for about 20 seconds and then went out, which I suspected was a bad sign. I waited for about 2 minutes and...