F150 Lightning FORscan thread

[GDN]

I routinely save my As-Built files from the Motorcraft site. I had my IPMA module updated by the dealer on 9/25. If I look at the differences between 8/30 and 9/30, I see 93 different lines in the IPMA module. Here are the first 10 differences: (Line 1's are after the update, line 2's are before update):

1     706-02-02  IPMA  Image Processing Module A (IPMA)     E47F     CE00     00
2     706-02-02  IPMA  Image Processing Module A (IPMA)     E07F     CE00     00
1     706-04-01  IPMA  Image Processing Module A (IPMA)     0A03     081E     05
2     706-04-01  IPMA  Image Processing Module A (IPMA)     0A03     0800     00
1     706-04-02  IPMA  Image Processing Module A (IPMA)     0A05     070A     03
2     706-04-02  IPMA  Image Processing Module A (IPMA)     0000     0000     00
1     706-05-01  IPMA  Image Processing Module A (IPMA)     0C00     0000     00
2     706-05-01  IPMA  Image Processing Module A (IPMA)     8000     0000     00
1     706-12-01  IPMA  Image Processing Module A (IPMA)     19BC     6800     00
2     706-12-01  IPMA  Image Processing Module A (IPMA)     19BC     6400     00
1     706-15-01  IPMA  Image Processing Module A (IPMA)     A969     6000     00
2     706-15-01  IPMA  Image Processing Module A (IPMA)     A969     0000     00
1     706-18-01  IPMA  Image Processing Module A (IPMA)     0D70     801F     07
2     706-18-01  IPMA  Image Processing Module A (IPMA)     0D70     8007     02
1     706-20-02  IPMA  Image Processing Module A (IPMA)     0680     0E05     05
2     706-20-02  IPMA  Image Processing Module A (IPMA)     0680     0E00     00
1     706-21-06  IPMA  Image Processing Module A (IPMA)     8154     26    
2     706-21-06  IPMA  Image Processing Module A (IPMA)     81        
1     706-29-01  IPMA  Image Processing Module A (IPMA)     0A2B     0891     9C
2     706-29-01  IPMA  Image Processing Module A (IPMA)     0A2B     08C4     8A

I use As-Built Explorer to compare, very handy. https://www.compulsivecode.com/Project_AsBuiltCompare.aspx

I was not aware of that tool - very nice. Its been about a month since I had an update, I'll take the opportunity to download my latest file as it exists.

Sponsored

 

[bmwhitetx]

I was not aware of that tool - very nice. Its been about a month since I had an update, I'll take the opportunity to download my latest file as it exists.

You can load up to 4 files and it will show differences in red. Works with either FORScan .abt files (which you have to save one module at a time AFAIK), or the Motorcraft .ab files.

 

[ktn]

your settings worked for me to have cameras at speed, however, it goes to the camera as soon as i go into drive mode... any way to change that?

Did you ever solve this?

 

[dippinMike]

Did you ever solve this?

no I reverted back, I have not seen a fix. I got rid of the message when you bring the camera up, but that’s all so far

 

[bmwhitetx]

I edited my comment some so sorry for that.

My original save files are from about a month ago and I have not received any updates since then (that I know of anyways).

Did you have the dealer do the Front Sensor CSP? That changed the IPMA dramatically.

 

[tannerk89]

Bought my Pro Monday and by Saturday had enabled glare free thanks to this thread.

Ran into a small issue. Lane centering button no longer works on the steering wheel. I need to confirm all of the as-built values that I changed match the instructions, particularly the SCM update. But, the glare free option was enabled and working fine so just a minor inconvenience to work through!

 

[21st Century Truck]

Here is a FORScan mod I applied a few days ago that I really like. The Lightning is annoying in that if you turn the truck on without your seat belt buckled, it chimes 4 times. (My routine is to hop in my vehicle, turn it on, then buckle my seat belt while it warms up (ICE) or boots.)

This mod changes the seat belt warning type from US to European. Now you get no chimes when starting the vehicle unbuckled. But you still get chimes if you start driving without being buckled (at an increasingly annoying level). Can't say if that part is any different.

IPC: 720-01-02: xxxx x2xx
Note this assumes the previous value was 0. If your value is different than 0 then add 2. Always refer to Livinitup's spreadsheet if unsure.

Thanks for this mod. I applied it today and I like it a the lot.

With the Lightning, it's easy to sit in the truck while it's ON and either do real work or play with Forscan etc, and now the seat belt chime doesn't ding until the truck actually moves.

BTW - in Reverse, the new seat belt chime also doesn't ding. The truck had to be moving forward.

 

[SNBI18]

Has anyone figured out how to turn off the headlight lamps for the DRL, so that only the light bar illuminates when the DRL is on?

 

[21st Century Truck]

Has anyone figured out how to turn off the headlight lamps for the DRL, so that only the light bar illuminates when the DRL is on?

I think that the center rectangular small headlight component IS the "DRL". At least, on my Lightning truck.

 

[SNBI18]

I think that the center rectangular small headlight component IS the "DRL". At least, on my Lightning truck.

Strange, I have a 24 lariat. My DRL is the light bar AND the small rectangle headlight.

 

[21st Century Truck]

Strange, I have a 24 lariat. My DRL is the light bar AND the small rectangle headlight.

Hmm I do wonder whether this is a trim level difference.

I adjusted my DRL strength (based on FORScan info on this forum) twice, from the OEM 10% up to 75% and then back down to 25%. I always check it at the plate glass front windows of the Mercedes dealership down my road.

That's how I know that in daylight, my "Daytime Running Lights" are just the two small center rectangle lights in my three-light matrix wig-wag LED headlights. The unibrow lightbar is dark on my truck until darkness.

Now, for clarity, I did turn on the glare-free function on my headlights, a fantastic feature BTW, and perhaps this has altered my Daytime Running Lights?

 

[SNBI18]

Hmm I do wonder whether this is a trim level difference.

I adjusted my DRL strength (based on FORScan info on this forum) twice, from the OEM 10% up to 75% and then back down to 25%. I always check it at the plate glass front windows of the Mercedes dealership down my road.

That's how I know that in daylight, my "Daytime Running Lights" are just the two small center rectangle lights in my three-light matrix wig-wag LED headlights. The unibrow lightbar is dark on my truck until darkness.

Now, for clarity, I did turn on the glare-free function on my headlights, a fantastic feature BTW, and perhaps this has altered my Daytime Running Lights?

I've never seen a lightning without that bar on during the day unless the DRL will shut off from the infotainment system. When the truck was new do you remember the bar ever being on during the day with the drl? My cousin has a 24 XLT and his DRL is the rectangular light plus the light bar.

 

[21st Century Truck]

I've never seen a lightning without that bar on during the day unless the DRL will shut off from the infotainment system. When the truck was new do you remember the bar ever being on during the day with the drl? My cousin has a 24 XLT and his DRL is the rectangular light plus the light bar.

Hard to notice when I'm driving haha... but once I started monkeying with the DRL intensity setting and checking in the Mercedes plate glass windows, I assure You that in daylight, just the central rectangles are ON. Therefore, I started to think of those rectangles as DRL.

I actually looked for Ford's definition of DRL for our Lightnings based on a similar discussion with another member here, but I gave up after a while... just not worth my time for more than 15 minutes of searching. Maybe someone here can clarify what is Ford Corporate's official "DRL for the Lightning" definition.

 

[GDN]

I've never seen a lightning without that bar on during the day unless the DRL will shut off from the infotainment system. When the truck was new do you remember the bar ever being on during the day with the drl? My cousin has a 24 XLT and his DRL is the rectangular light plus the light bar.

The light bar is on during the day when the truck is not in park. The light bar is NOT part of the DRL's - at least not from a control perspective. You can not adjust the brightness of the bar. It's been proven too many times and last year it was discovered how the light bar is powered. Each half gets power from the headlight on that side of the truck. You turn the power on or off to the light bar through SW of the headlamp.

If you think you are adjusting the brightness of the light bar you must be doing it in two places - each headlight.

 

[21st Century Truck]

The light bar is on during the day when the truck is not in park. The light bar is NOT part of the DRL's - at least not from a control perspective. You can not adjust the brightness of the bar. It's been proven too many times and last year it was discovered how the light bar is powered. Each half gets power from the headlight on that side of the truck. You turn the power on or off to the light bar through SW of the headlamp.

If you think you are adjusting the brightness of the light bar you must be doing it in two places - each headlight.

Hey Greg!

Sponsored