The HVAC module is very slow to write. I was able to do it with a MX+. If you haven’t already, try to optimize your usb adapter latency and turn on auto increase in forscan.
Does the rear view camera still have the “full screen not available” black box? I would love to get rid of that!I too am on Power Up 1.7.1, and I was also able to use Livinit Up’s sheet to manually change those 3 lines in the 2 modules, reset the APIM, and then the cameras in motion works for me now also! First button press gives hitch cam and second press gives 360 view with cargo cam.
I have a job 1 Platinum Powerboost with 7.2 Pro Power, and Blue Cruise Prep, purchased on 1/15/21. The last update I received notification of was 1.7.1, on 7/28/21, and nothing after that. I have installed the widget and I think it also says I have 1.7.1, so I have included some of the raw data for assistance.
Maybe someone can help me understand why it says Vehicle Not Drivable. And, how can I tell the failed update version?
Bed Cam & 360 Cam In Motion:
Hitch Cam:
I’ve been using a J2534? Pass through cable. I’ll try another cable.
I was so excited to see this, I am at work and ran out and followed the instructions and now I have the truck that I wanted. I do not feel like I own a contractor truck for a personal vehicle. Thank you for figuring this out.
I tried both my OBDLink EX and VCX Nano and no luck for either. Both optimized for peak performance.
I can confirm it will write to the HVAC, I have written to mine several times. I use the Vlinker FS
not for me, no matter what I try, it will not write to HVAC. I get a service procedure interrupted failure every time.
Last idea for you if you didn’t already try it: do not use the saved profile when you connect. Hit No and let I rescan the entire truck, then try to write the change.
