Is a front receiver hitch possible?

[Eli]

Is a front receiver hitch possible on a Lightning?

I just picked up my 2022 Lightning Pro today. Its so exciting!

Sponsored

 

[Maquis]

A few threads about this. Here’s one.

 

[Danface]

Someone posted a pic of a "homemade" one that looked pretty darn good

 

[Tedmister2]

I had one on for awhile. Took it off when I needed a battery module replaced. Did not want to explain my thoughts to the dealer. I miss it and will put it back on.

 

[MaintGrl]

Those are a couple of nice set-ups...

 

[MaintGrl]

I had one on for awhile. Took it off when I needed a battery module replaced. Did not want to explain my thoughts to the dealer. I miss it and will put it back on.

Is it possible to get a couple of closer pictures, how it is attached?

 

[Tedmister2]

I thought I had some photos, but I can’t find them. The receiver bolted right up with four bolts, washers and lock washers. This was a Curtis hitch from a 2020 F150 rear receiver. No drilling. The air dam when down is in the way. Did not bother anything except it was not working and I did not want to drill or cut out a place for the dam to go around the receiver.

 

[Tom Jensen]

I thought I had some photos, but I can’t find them. The receiver bolted right up with four bolts, washers and lock washers. This was a Curtis hitch from a 2020 F150 rear receiver. No drilling. The air dam when down is in the way. Did not bother anything except it was not working and I did not want to drill or cut out a place for the dam to go around the receiver.

Is a front receiver hitch possible on a Lightning?

I just picked up my 2022 Lightning Pro today. Its so exciting!

Do check out my post and all the follow ups: https://www.f150lightningforum.com/forum/threads/front-hitch-installed-on-lightning-good-news.20834/

 

[MaintGrl]

Do check out my post and all the follow ups: https://www.f150lightningforum.com/forum/threads/front-hitch-installed-on-lightning-good-news.20834/

Ya, you did a really sweet job on that, looks like a production/fab job

 

[Tom Jensen]

Ya, you did a really sweet job on that, looks like a production/fab job

Thank you. But all credit goes to GarrettBlake. He designed and fabricated the receiver. My role was to install and use it. It’s excellent.

Sponsored